//! Call session — manages the end-to-end pipeline for a single voice call.
//!
//! Pipeline: mic → encode → FEC → encrypt → send / recv → decrypt → FEC → decode → speaker

use std::time::{Duration, Instant};

use bytes::Bytes;
use tracing::{debug, info, warn};

use wzp_codec::{AutoGainControl, ComfortNoise, EchoCanceller, NoiseSupressor, SilenceDetector};
use wzp_fec::{RaptorQFecDecoder, RaptorQFecEncoder};
use wzp_proto::jitter::{JitterBuffer, PlayoutResult};
use wzp_proto::packet::{MediaHeader, MediaPacket, MiniFrameContext};
use wzp_proto::quality::AdaptiveQualityController;
use wzp_proto::traits::{
    AudioDecoder, AudioEncoder, FecDecoder, FecEncoder,
};
use wzp_proto::packet::QualityReport;
use wzp_proto::{CodecId, QualityProfile};

/// Configuration for a call session.
pub struct CallConfig {
    /// Initial quality profile.
    pub profile: QualityProfile,
    /// Jitter buffer target depth.
    pub jitter_target: usize,
    /// Jitter buffer max depth.
    pub jitter_max: usize,
    /// Jitter buffer min depth before playout.
    pub jitter_min: usize,
    /// Enable silence suppression (default: true).
    pub suppression_enabled: bool,
    /// RMS threshold for silence detection (default: 100.0 for i16 PCM).
    pub silence_threshold_rms: f64,
    /// Hangover frames before suppression begins (default: 5 = 100ms at 20ms frames).
    pub silence_hangover_frames: u32,
    /// Comfort noise amplitude (default: 50).
    pub comfort_noise_level: i16,
    /// Enable ML-based noise suppression via RNNoise (default: true).
    pub noise_suppression: bool,
    /// Enable mini-frame header compression (default: true).
    /// When enabled, only every 50th frame carries a full 12-byte MediaHeader;
    /// intermediate frames use a compact 4-byte MiniHeader.
    pub mini_frames_enabled: bool,
    /// Enable adaptive jitter buffer (default: true).
    ///
    /// When true, the jitter buffer target depth is automatically adjusted
    /// based on observed inter-arrival jitter (NetEq-inspired algorithm).
    pub adaptive_jitter: bool,
}

impl Default for CallConfig {
    fn default() -> Self {
        Self {
            profile: QualityProfile::GOOD,
            jitter_target: 10,
            jitter_max: 250,
            jitter_min: 3, // 60ms — low latency start, still smooths jitter
            suppression_enabled: true,
            silence_threshold_rms: 100.0,
            silence_hangover_frames: 5,
            comfort_noise_level: 50,
            noise_suppression: true,
            mini_frames_enabled: true,
            adaptive_jitter: true,
        }
    }
}

impl CallConfig {
    /// Build a `CallConfig` tuned for the given quality profile.
    pub fn from_profile(profile: QualityProfile) -> Self {
        let (jitter_target, jitter_max, jitter_min) = if profile == QualityProfile::CATASTROPHIC {
            // Catastrophic: larger jitter buffer to absorb spikes
            (20, 500, 8)
        } else if profile == QualityProfile::DEGRADED {
            // Degraded: moderately deeper buffer
            (15, 350, 5)
        } else {
            // Good: low-latency defaults
            (10, 250, 3)
        };
        Self {
            profile,
            jitter_target,
            jitter_max,
            jitter_min,
            ..Default::default()
        }
    }
}

/// Sliding-window quality adapter that reacts to relay `QualityReport`s.
///
/// Thresholds (per-report):
///   - loss > 15% OR rtt > 200ms  => CATASTROPHIC
///   - loss > 5%  OR rtt > 100ms  => DEGRADED
///   - otherwise                   => GOOD
///
/// Hysteresis: a profile switch is only recommended after the new profile
/// has been the recommendation for 3 or more consecutive reports.
pub struct QualityAdapter {
    /// Sliding window of the last N reports.
    window: std::collections::VecDeque<QualityReport>,
    /// Maximum window size.
    max_window: usize,
    /// Number of consecutive reports recommending the same (non-current) profile.
    consecutive_same: u32,
    /// The profile that the last `consecutive_same` reports recommended.
    pending_profile: Option<QualityProfile>,
}

/// Number of consecutive reports required before accepting a switch.
const HYSTERESIS_COUNT: u32 = 3;
/// Default sliding window capacity.
const ADAPTER_WINDOW: usize = 10;

impl QualityAdapter {
    pub fn new() -> Self {
        Self {
            window: std::collections::VecDeque::with_capacity(ADAPTER_WINDOW),
            max_window: ADAPTER_WINDOW,
            consecutive_same: 0,
            pending_profile: None,
        }
    }

    /// Record a new quality report from the relay.
    pub fn ingest(&mut self, report: &QualityReport) {
        if self.window.len() >= self.max_window {
            self.window.pop_front();
        }
        self.window.push_back(*report);
    }

    /// Classify a single report into a recommended profile.
    fn classify(report: &QualityReport) -> QualityProfile {
        let loss = report.loss_percent();
        let rtt = report.rtt_ms();

        if loss > 15.0 || rtt > 200 {
            QualityProfile::CATASTROPHIC
        } else if loss > 5.0 || rtt > 100 {
            QualityProfile::DEGRADED
        } else {
            QualityProfile::GOOD
        }
    }

    /// Return the best profile based on the most recent report in the window.
    pub fn recommended_profile(&self) -> QualityProfile {
        match self.window.back() {
            Some(report) => Self::classify(report),
            None => QualityProfile::GOOD,
        }
    }

    /// Determine if a profile switch should happen, applying hysteresis.
    ///
    /// Returns `Some(new_profile)` only when the recommendation has differed
    /// from `current` for at least `HYSTERESIS_COUNT` consecutive reports.
    pub fn should_switch(&mut self, current: &QualityProfile) -> Option<QualityProfile> {
        let recommended = self.recommended_profile();

        if recommended == *current {
            // Conditions match current profile — reset pending state.
            self.consecutive_same = 0;
            self.pending_profile = None;
            return None;
        }

        // Recommended differs from current.
        match self.pending_profile {
            Some(pending) if pending == recommended => {
                self.consecutive_same += 1;
            }
            _ => {
                // New or changed recommendation — restart counter.
                self.pending_profile = Some(recommended);
                self.consecutive_same = 1;
            }
        }

        if self.consecutive_same >= HYSTERESIS_COUNT {
            self.consecutive_same = 0;
            self.pending_profile = None;
            Some(recommended)
        } else {
            None
        }
    }
}

/// Manages the encode/send side of a call.
pub struct CallEncoder {
    /// Audio encoder (Opus or Codec2).
    audio_enc: Box<dyn AudioEncoder>,
    /// FEC encoder.
    fec_enc: RaptorQFecEncoder,
    /// Current profile.
    profile: QualityProfile,
    /// Outbound sequence counter.
    seq: u16,
    /// Current FEC block.
    block_id: u8,
    /// Frame index within current block.
    frame_in_block: u8,
    /// Timestamp counter (ms).
    timestamp_ms: u32,
    /// Acoustic echo canceller (removes speaker echo from mic signal).
    aec: EchoCanceller,
    /// Automatic gain control (normalises mic level).
    agc: AutoGainControl,
    /// Silence detector for suppression.
    silence_detector: SilenceDetector,
    /// Whether silence suppression is enabled.
    suppression_enabled: bool,
    /// Total frames suppressed (telemetry).
    frames_suppressed: u64,
    /// Frames since last CN packet was sent.
    cn_counter: u32,
    /// Comfort noise amplitude level (stored for CN packet payload).
    cn_level: i16,
    /// ML-based noise suppressor (RNNoise).
    denoiser: NoiseSupressor,
    /// Mini-frame compression context (tracks last full header).
    mini_context: MiniFrameContext,
    /// Whether mini-frame header compression is enabled.
    mini_frames_enabled: bool,
    /// Frames encoded since the last full header was emitted.
    frames_since_full: u32,
}

impl CallEncoder {
    pub fn new(config: &CallConfig) -> Self {
        Self {
            audio_enc: wzp_codec::create_encoder(config.profile),
            fec_enc: wzp_fec::create_encoder(&config.profile),
            profile: config.profile,
            seq: 0,
            block_id: 0,
            frame_in_block: 0,
            timestamp_ms: 0,
            aec: EchoCanceller::new(48000, 30), // 30ms echo tail (laptop/phone)
            agc: AutoGainControl::new(),
            silence_detector: SilenceDetector::new(
                config.silence_threshold_rms,
                config.silence_hangover_frames,
            ),
            suppression_enabled: config.suppression_enabled,
            frames_suppressed: 0,
            cn_counter: 0,
            cn_level: config.comfort_noise_level,
            denoiser: {
                let mut d = NoiseSupressor::new();
                d.set_enabled(config.noise_suppression);
                d
            },
            mini_context: MiniFrameContext::default(),
            mini_frames_enabled: config.mini_frames_enabled,
            frames_since_full: 0,
        }
    }

    /// Serialize a `MediaPacket` for transmission, applying mini-frame
    /// compression when enabled.
    ///
    /// Returns compact wire bytes: either `[FRAME_TYPE_FULL][MediaHeader][payload]`
    /// or `[FRAME_TYPE_MINI][MiniHeader][payload]`.
    pub fn serialize_compact(&mut self, packet: &MediaPacket) -> Bytes {
        if self.mini_frames_enabled {
            packet.encode_compact(&mut self.mini_context, &mut self.frames_since_full)
        } else {
            packet.to_bytes()
        }
    }

    /// Encode a PCM frame and produce media packets (source + repair when block is full).
    ///
    /// Input: 48kHz mono PCM, frame size depends on profile (960 for 20ms, 1920 for 40ms).
    /// Output: one or more MediaPackets to send.
    pub fn encode_frame(&mut self, pcm: &[i16]) -> Result<Vec<MediaPacket>, anyhow::Error> {
        // Copy PCM into a mutable buffer for the processing pipeline.
        let mut pcm_buf = pcm.to_vec();

        // Step 1: Echo cancellation (far-end reference must have been fed already).
        self.aec.process_frame(&mut pcm_buf);

        // Step 2: Automatic gain control (normalise mic level).
        self.agc.process_frame(&mut pcm_buf);

        // Step 3: Noise suppression (RNNoise).
        if self.denoiser.is_enabled() {
            self.denoiser.process(&mut pcm_buf);
        }

        let pcm = &pcm_buf[..];

        // Silence suppression: skip encoding silent frames, periodically send CN.
        if self.suppression_enabled && self.silence_detector.is_silent(pcm) {
            self.frames_suppressed += 1;
            self.cn_counter += 1;

            // Advance timestamp even for suppressed frames.
            self.timestamp_ms = self
                .timestamp_ms
                .wrapping_add(self.profile.frame_duration_ms as u32);

            // Every 10 frames (~200ms), send a comfort noise packet.
            if self.cn_counter % 10 == 0 {
                let cn_pkt = MediaPacket {
                    header: MediaHeader {
                        version: 0,
                        is_repair: false,
                        codec_id: CodecId::ComfortNoise,
                        has_quality_report: false,
                        fec_ratio_encoded: 0,
                        seq: self.seq,
                        timestamp: self.timestamp_ms,
                        fec_block: self.block_id,
                        fec_symbol: 0,
                        reserved: 0,
                        csrc_count: 0,
                    },
                    payload: Bytes::from(vec![self.cn_level as u8]),
                    quality_report: None,
                };
                self.seq = self.seq.wrapping_add(1);
                return Ok(vec![cn_pkt]);
            }

            return Ok(vec![]);
        }

        // Not silent — reset CN counter and proceed with normal encoding.
        self.cn_counter = 0;

        // Encode audio
        let mut encoded = vec![0u8; self.audio_enc.max_frame_bytes()];
        let enc_len = self.audio_enc.encode(pcm, &mut encoded)?;
        encoded.truncate(enc_len);

        // Build source media packet
        let source_pkt = MediaPacket {
            header: MediaHeader {
                version: 0,
                is_repair: false,
                codec_id: self.profile.codec,
                has_quality_report: false,
                fec_ratio_encoded: MediaHeader::encode_fec_ratio(self.profile.fec_ratio),
                seq: self.seq,
                timestamp: self.timestamp_ms,
                fec_block: self.block_id,
                fec_symbol: self.frame_in_block,
                reserved: 0,
                csrc_count: 0,
            },
            payload: Bytes::from(encoded.clone()),
            quality_report: None,
        };

        self.seq = self.seq.wrapping_add(1);
        self.timestamp_ms = self
            .timestamp_ms
            .wrapping_add(self.profile.frame_duration_ms as u32);

        let mut output = vec![source_pkt];

        // Add to FEC encoder
        self.fec_enc.add_source_symbol(&encoded)?;
        self.frame_in_block += 1;

        // If block is full, generate repair and finalize
        if self.frame_in_block >= self.profile.frames_per_block {
            if let Ok(repairs) = self.fec_enc.generate_repair(self.profile.fec_ratio) {
                for (sym_idx, repair_data) in repairs {
                    output.push(MediaPacket {
                        header: MediaHeader {
                            version: 0,
                            is_repair: true,
                            codec_id: self.profile.codec,
                            has_quality_report: false,
                            fec_ratio_encoded: MediaHeader::encode_fec_ratio(
                                self.profile.fec_ratio,
                            ),
                            seq: self.seq,
                            timestamp: self.timestamp_ms,
                            fec_block: self.block_id,
                            fec_symbol: sym_idx,
                            reserved: 0,
                            csrc_count: 0,
                        },
                        payload: Bytes::from(repair_data),
                        quality_report: None,
                    });
                    self.seq = self.seq.wrapping_add(1);
                }
            }
            let _ = self.fec_enc.finalize_block();
            self.block_id = self.block_id.wrapping_add(1);
            self.frame_in_block = 0;
        }

        Ok(output)
    }

    /// Update the quality profile (codec switch, FEC ratio change).
    pub fn set_profile(&mut self, profile: QualityProfile) -> Result<(), anyhow::Error> {
        self.audio_enc.set_profile(profile)?;
        self.fec_enc = wzp_fec::create_encoder(&profile);
        self.profile = profile;
        self.frame_in_block = 0;
        Ok(())
    }

    /// Feed decoded playout audio as the echo reference signal.
    ///
    /// Must be called with each decoded frame BEFORE the corresponding
    /// microphone frame is processed.
    pub fn feed_aec_farend(&mut self, farend: &[i16]) {
        self.aec.feed_farend(farend);
    }

    /// Enable or disable acoustic echo cancellation.
    pub fn set_aec_enabled(&mut self, enabled: bool) {
        self.aec.set_enabled(enabled);
    }

    /// Enable or disable automatic gain control.
    pub fn set_agc_enabled(&mut self, enabled: bool) {
        self.agc.set_enabled(enabled);
    }
}

/// Manages the recv/decode side of a call.
pub struct CallDecoder {
    /// Audio decoder.
    audio_dec: Box<dyn AudioDecoder>,
    /// FEC decoder.
    fec_dec: RaptorQFecDecoder,
    /// Jitter buffer.
    jitter: JitterBuffer,
    /// Quality controller (used when ingesting quality reports).
    pub quality: AdaptiveQualityController,
    /// Current profile.
    profile: QualityProfile,
    /// Comfort noise generator for filling silent gaps.
    comfort_noise: ComfortNoise,
    /// Whether the last decoded frame was comfort noise.
    last_was_cn: bool,
    /// Mini-frame decompression context (tracks last full header baseline).
    mini_context: MiniFrameContext,
}

impl CallDecoder {
    pub fn new(config: &CallConfig) -> Self {
        let jitter = if config.adaptive_jitter {
            JitterBuffer::new_adaptive(config.jitter_min, config.jitter_max)
        } else {
            JitterBuffer::new(config.jitter_target, config.jitter_max, config.jitter_min)
        };
        Self {
            audio_dec: wzp_codec::create_decoder(config.profile),
            fec_dec: wzp_fec::create_decoder(&config.profile),
            jitter,
            quality: AdaptiveQualityController::new(),
            profile: config.profile,
            comfort_noise: ComfortNoise::new(50),
            last_was_cn: false,
            mini_context: MiniFrameContext::default(),
        }
    }

    /// Deserialize a compact wire-format buffer into a `MediaPacket`,
    /// auto-detecting full vs mini headers.
    ///
    /// Returns `None` on malformed data or if a mini-frame arrives before
    /// any full header baseline has been established.
    pub fn deserialize_compact(&mut self, buf: &[u8]) -> Option<MediaPacket> {
        MediaPacket::decode_compact(buf, &mut self.mini_context)
    }

    /// Feed a received media packet into the decode pipeline.
    pub fn ingest(&mut self, packet: MediaPacket) {
        // Feed to FEC decoder
        let _ = self.fec_dec.add_symbol(
            packet.header.fec_block,
            packet.header.fec_symbol,
            packet.header.is_repair,
            &packet.payload,
        );

        // If not a repair packet, also feed directly to jitter buffer
        if !packet.header.is_repair {
            self.jitter.push(packet);
        }
    }

    /// Decode the next audio frame from the jitter buffer.
    ///
    /// Returns PCM samples (48kHz mono) or None if not ready.
    pub fn decode_next(&mut self, pcm: &mut [i16]) -> Option<usize> {
        match self.jitter.pop() {
            PlayoutResult::Packet(pkt) => {
                // Comfort noise packet: generate CN instead of decoding audio.
                if pkt.header.codec_id == CodecId::ComfortNoise {
                    self.comfort_noise.generate(pcm);
                    self.last_was_cn = true;
                    self.jitter.record_decode();
                    return Some(pcm.len());
                }

                self.last_was_cn = false;
                let result = match self.audio_dec.decode(&pkt.payload, pcm) {
                    Ok(n) => Some(n),
                    Err(e) => {
                        warn!("decode error: {e}, using PLC");
                        self.audio_dec.decode_lost(pcm).ok()
                    }
                };
                if result.is_some() {
                    self.jitter.record_decode();
                }
                result
            }
            PlayoutResult::Missing { seq } => {
                // Only generate PLC if there are still packets buffered ahead.
                // Otherwise we've drained everything — return None to stop.
                if self.jitter.depth() > 0 {
                    debug!(seq, "packet loss, generating PLC");
                    let result = self.audio_dec.decode_lost(pcm).ok();
                    if result.is_some() {
                        self.jitter.record_decode();
                    }
                    result
                } else {
                    self.jitter.record_underrun();
                    None
                }
            }
            PlayoutResult::NotReady => {
                self.jitter.record_underrun();
                None
            }
        }
    }

    /// Get the current quality profile.
    pub fn profile(&self) -> QualityProfile {
        self.profile
    }

    /// Get jitter buffer statistics.
    pub fn stats(&self) -> &wzp_proto::jitter::JitterStats {
        self.jitter.stats()
    }

    /// Reset jitter buffer statistics counters.
    pub fn reset_stats(&mut self) {
        self.jitter.reset_stats();
    }
}

/// Periodic telemetry logger for jitter buffer statistics.
///
/// Call `maybe_log` on each decode tick; it will emit a `tracing::info!` event
/// no more frequently than the configured interval.
pub struct JitterTelemetry {
    interval: Duration,
    last_report: Instant,
}

impl JitterTelemetry {
    /// Create a new telemetry logger that reports at most once per `interval_secs`.
    pub fn new(interval_secs: u64) -> Self {
        Self {
            interval: Duration::from_secs(interval_secs),
            last_report: Instant::now(),
        }
    }

    /// Log jitter statistics if the interval has elapsed. Returns `true` when a
    /// log line was emitted.
    pub fn maybe_log(&mut self, stats: &wzp_proto::jitter::JitterStats) -> bool {
        let now = Instant::now();
        if now.duration_since(self.last_report) >= self.interval {
            info!(
                buffer_depth = stats.current_depth,
                underruns = stats.underruns,
                overruns = stats.overruns,
                late_packets = stats.packets_late,
                total_received = stats.packets_received,
                total_decoded = stats.total_decoded,
                max_depth_seen = stats.max_depth_seen,
                "jitter buffer telemetry"
            );
            self.last_report = now;
            true
        } else {
            false
        }
    }
}

#[cfg(test)]
mod tests {
    use super::*;
    use wzp_proto::CodecId;

    #[test]
    fn encoder_produces_packets() {
        let config = CallConfig::default();
        let mut enc = CallEncoder::new(&config);

        // 20ms at 48kHz = 960 samples
        let pcm = vec![0i16; 960];
        let packets = enc.encode_frame(&pcm).unwrap();
        assert!(!packets.is_empty());
        assert_eq!(packets[0].header.seq, 0);
        assert!(!packets[0].header.is_repair);
    }

    #[test]
    fn encoder_generates_repair_on_full_block() {
        let config = CallConfig {
            profile: QualityProfile::GOOD, // 5 frames/block
            ..Default::default()
        };
        let mut enc = CallEncoder::new(&config);
        let pcm = vec![0i16; 960];

        let mut total_packets = 0;
        let mut repair_count = 0;
        for _ in 0..5 {
            let packets = enc.encode_frame(&pcm).unwrap();
            for p in &packets {
                if p.header.is_repair {
                    repair_count += 1;
                }
            }
            total_packets += packets.len();
        }
        assert!(repair_count > 0, "should have repair packets after full block");
        assert!(total_packets > 5, "total {total_packets} should exceed 5 source");
    }

    #[test]
    fn decoder_handles_ingest() {
        let config = CallConfig::default();
        let mut dec = CallDecoder::new(&config);

        let pkt = MediaPacket {
            header: MediaHeader {
                version: 0,
                is_repair: false,
                codec_id: CodecId::Opus24k,
                has_quality_report: false,
                fec_ratio_encoded: 0,
                seq: 0,
                timestamp: 0,
                fec_block: 0,
                fec_symbol: 0,
                reserved: 0,
                csrc_count: 0,
            },
            payload: Bytes::from(vec![0u8; 60]),
            quality_report: None,
        };
        dec.ingest(pkt);
        // Not enough buffered yet (min_depth = 25)
        let mut pcm = vec![0i16; 960];
        assert!(dec.decode_next(&mut pcm).is_none());
    }

    // ---- QualityAdapter tests ----

    /// Helper: build a QualityReport from human-readable loss% and RTT ms.
    fn make_report(loss_pct_f: f32, rtt_ms: u16) -> QualityReport {
        QualityReport {
            loss_pct: (loss_pct_f / 100.0 * 255.0) as u8,
            rtt_4ms: (rtt_ms / 4) as u8,
            jitter_ms: 10,
            bitrate_cap_kbps: 200,
        }
    }

    #[test]
    fn good_conditions_stays_good() {
        let mut adapter = QualityAdapter::new();
        let good = make_report(1.0, 40);
        for _ in 0..10 {
            adapter.ingest(&good);
        }
        assert_eq!(adapter.recommended_profile(), QualityProfile::GOOD);

        let current = QualityProfile::GOOD;
        for _ in 0..10 {
            adapter.ingest(&good);
            assert!(adapter.should_switch(&current).is_none());
        }
    }

    #[test]
    fn high_loss_degrades() {
        let mut adapter = QualityAdapter::new();
        // 8% loss, low RTT => DEGRADED
        let degraded = make_report(8.0, 40);
        let mut current = QualityProfile::GOOD;

        // Feed 3 consecutive degraded reports to pass hysteresis
        for _ in 0..3 {
            adapter.ingest(&degraded);
            if let Some(new) = adapter.should_switch(&current) {
                current = new;
            }
        }
        assert_eq!(current, QualityProfile::DEGRADED);
    }

    #[test]
    fn catastrophic_conditions() {
        let mut adapter = QualityAdapter::new();
        // 20% loss => CATASTROPHIC
        let terrible = make_report(20.0, 50);
        let mut current = QualityProfile::GOOD;

        for _ in 0..3 {
            adapter.ingest(&terrible);
            if let Some(new) = adapter.should_switch(&current) {
                current = new;
            }
        }
        assert_eq!(current, QualityProfile::CATASTROPHIC);

        // Also test via high RTT alone (250ms > 200ms threshold)
        let mut adapter2 = QualityAdapter::new();
        let high_rtt = make_report(1.0, 252); // rtt_4ms rounds to 63 => 252ms
        let mut current2 = QualityProfile::GOOD;

        for _ in 0..3 {
            adapter2.ingest(&high_rtt);
            if let Some(new) = adapter2.should_switch(&current2) {
                current2 = new;
            }
        }
        assert_eq!(current2, QualityProfile::CATASTROPHIC);
    }

    #[test]
    fn hysteresis_prevents_flapping() {
        let mut adapter = QualityAdapter::new();
        let good = make_report(1.0, 40);
        let bad = make_report(8.0, 40); // DEGRADED
        let current = QualityProfile::GOOD;

        // Alternate good/bad — should never trigger a switch because
        // we never get 3 consecutive same-recommendation reports.
        for _ in 0..20 {
            adapter.ingest(&bad);
            assert!(adapter.should_switch(&current).is_none());
            adapter.ingest(&good);
            assert!(adapter.should_switch(&current).is_none());
        }
        assert_eq!(current, QualityProfile::GOOD);
    }

    #[test]
    fn recovery_to_good() {
        let mut adapter = QualityAdapter::new();
        let bad = make_report(20.0, 50);
        let good = make_report(1.0, 40);

        // Drive to CATASTROPHIC first
        let mut current = QualityProfile::GOOD;
        for _ in 0..3 {
            adapter.ingest(&bad);
            if let Some(new) = adapter.should_switch(&current) {
                current = new;
            }
        }
        assert_eq!(current, QualityProfile::CATASTROPHIC);

        // Now feed good reports — should recover to GOOD after 3 consecutive
        for _ in 0..3 {
            adapter.ingest(&good);
            if let Some(new) = adapter.should_switch(&current) {
                current = new;
            }
        }
        assert_eq!(current, QualityProfile::GOOD);
    }

    #[test]
    fn call_config_from_profile() {
        let good = CallConfig::from_profile(QualityProfile::GOOD);
        assert_eq!(good.profile, QualityProfile::GOOD);
        assert_eq!(good.jitter_min, 3);

        let degraded = CallConfig::from_profile(QualityProfile::DEGRADED);
        assert_eq!(degraded.profile, QualityProfile::DEGRADED);
        assert!(degraded.jitter_target > good.jitter_target);

        let catastrophic = CallConfig::from_profile(QualityProfile::CATASTROPHIC);
        assert_eq!(catastrophic.profile, QualityProfile::CATASTROPHIC);
        assert!(catastrophic.jitter_max > degraded.jitter_max);
    }

    // ---- JitterStats telemetry tests ----

    fn make_test_packet(seq: u16) -> MediaPacket {
        MediaPacket {
            header: MediaHeader {
                version: 0,
                is_repair: false,
                codec_id: CodecId::Opus24k,
                has_quality_report: false,
                fec_ratio_encoded: 0,
                seq,
                timestamp: seq as u32 * 20,
                fec_block: 0,
                fec_symbol: seq as u8,
                reserved: 0,
                csrc_count: 0,
            },
            payload: Bytes::from(vec![0u8; 60]),
            quality_report: None,
        }
    }

    #[test]
    fn stats_track_ingestion() {
        let config = CallConfig::default();
        let mut dec = CallDecoder::new(&config);

        for i in 0..5u16 {
            dec.ingest(make_test_packet(i));
        }

        let stats = dec.stats();
        assert_eq!(stats.packets_received, 5);
        assert_eq!(stats.current_depth, 5);
        assert_eq!(stats.max_depth_seen, 5);
    }

    #[test]
    fn stats_track_underruns() {
        let config = CallConfig::default();
        let mut dec = CallDecoder::new(&config);

        // Empty buffer — decode_next should record underruns
        let mut pcm = vec![0i16; 960];
        dec.decode_next(&mut pcm);
        dec.decode_next(&mut pcm);
        dec.decode_next(&mut pcm);

        assert_eq!(dec.stats().underruns, 3);
    }

    #[test]
    fn stats_reset() {
        let config = CallConfig::default();
        let mut dec = CallDecoder::new(&config);

        // Generate some stats: ingest packets and trigger underruns on empty buffer
        for i in 0..3u16 {
            dec.ingest(make_test_packet(i));
        }
        // Also call decode on empty decoder to get underruns
        let config2 = CallConfig::default();
        let mut dec2 = CallDecoder::new(&config2);
        let mut pcm = vec![0i16; 960];
        dec2.decode_next(&mut pcm); // underrun — nothing in buffer

        assert!(dec.stats().packets_received > 0);
        assert!(dec2.stats().underruns > 0);

        // Test reset on the decoder with ingested packets
        dec.reset_stats();
        let stats = dec.stats();
        assert_eq!(stats.packets_received, 0);
        assert_eq!(stats.underruns, 0);
        assert_eq!(stats.overruns, 0);
        assert_eq!(stats.total_decoded, 0);
        assert_eq!(stats.packets_late, 0);
        assert_eq!(stats.max_depth_seen, 0);

        // Test reset on the decoder with underruns
        dec2.reset_stats();
        assert_eq!(dec2.stats().underruns, 0);
    }

    #[test]
    fn telemetry_respects_interval() {
        use wzp_proto::jitter::JitterStats;

        let mut telemetry = JitterTelemetry::new(60); // 60-second interval
        let stats = JitterStats::default();

        // First call right after creation — should not log because no time has passed
        // (the interval hasn't elapsed since construction)
        let logged = telemetry.maybe_log(&stats);
        assert!(!logged, "should not log before interval elapses");
    }

    #[test]
    fn silence_suppression_skips_silent_frames() {
        let config = CallConfig {
            suppression_enabled: true,
            silence_threshold_rms: 100.0,
            silence_hangover_frames: 5,
            comfort_noise_level: 50,
            ..Default::default()
        };
        let mut enc = CallEncoder::new(&config);

        let silence = vec![0i16; 960];
        let mut total_packets = 0;
        let mut cn_packets = 0;

        for _ in 0..20 {
            let packets = enc.encode_frame(&silence).unwrap();
            for p in &packets {
                if p.header.codec_id == CodecId::ComfortNoise {
                    cn_packets += 1;
                    // CN payload should be a single byte with the noise level.
                    assert_eq!(p.payload.len(), 1);
                }
            }
            total_packets += packets.len();
        }

        // First 5 frames are hangover (not suppressed) => 5 normal source packets
        // (plus potential repair packets from FEC block completion).
        // Remaining 15 frames are suppressed; CN every 10 frames => 1 CN packet
        // (cn_counter hits 10 on the 10th suppressed frame).
        assert!(
            total_packets < 20,
            "suppression should reduce packet count, got {total_packets}"
        );
        assert!(
            cn_packets >= 1,
            "should have at least one CN packet, got {cn_packets}"
        );
        assert!(
            enc.frames_suppressed > 0,
            "frames_suppressed should be > 0"
        );
    }
}