Major rewrite of relay federation replacing virtual participants with
a clean router model:
1. Global rooms: [[global_rooms]] in TOML config declares rooms that
are bridged across federation. Each relay is a router + local SFU.
2. Room events: RoomManager emits LocalJoin/LocalLeave via broadcast
channel when rooms transition between empty and non-empty.
3. GlobalRoomActive/Inactive signals: relays announce when they have
local participants in global rooms. Peers track active state and
forward media accordingly. Announcements propagate for multi-hop.
4. Media forwarding: separated from SFU loop. Local participant sends
via mpsc channel → egress task → forward_to_peers() → room-hash
tagged datagrams to active peer links. Inbound datagrams delivered
to local participants + forwarded to other active peers (multi-hop).
5. Loop prevention: don't forward back to source relay.
6. Room name hashing: is_global_room() checks both plain name and
hash (clients hash room names for SNI privacy).
Removed: ParticipantSender::Federation, federated_participants, virtual
participant join/leave, periodic room polling. Rooms now only contain
local participants.
Signaling tested: 3-relay chain (A→B←C) correctly propagates
GlobalRoomActive through B to both A and C. Media forwarding plumbing
in place but needs final debugging.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Added [[trusted]] config: relay B can accept inbound federation
from relay A by fingerprint alone, without knowing A's address.
A connects to B with [[peers]], B trusts A with [[trusted]].
- FederationHello signal: outbound connections send their TLS
fingerprint as first signal. The accepting relay verifies it
against [[peers]] (by IP) or [[trusted]] (by fingerprint).
- Tested 3-relay chain: A→B←C. Both A and C connect to B, B trusts
both. B correctly accepts both inbound connections. Room
announcements flow A→B and C→B.
- Remaining: B needs to announce rooms back to A and C on the same
connection so media can flow A→B→C. Currently A has no virtual
participant for B, so media doesn't reach B's SFU for forwarding.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Phase 1 of relay federation:
1. Signal messages: FederationRoomJoin/Leave/ParticipantUpdate added
to SignalMessage enum for relay-to-relay room coordination.
2. Room changes: ParticipantOrigin (Local/Federated) tracking, loop
prevention (federated media only forwards to local participants),
ParticipantSender::Federation with 8-byte room-hash prefixed
datagrams, merged participant lists (local + remote), new methods:
join_federated(), update_federated_participants(), local_senders(),
active_rooms(), local_participants().
3. FederationManager: connects to configured peers via QUIC with SNI
"_federation", reconnects with exponential backoff (5s-300s),
exchanges FederationRoomJoin signals, runs recv loops for both
signals and media datagrams, creates virtual participants in rooms.
4. Accept-side: _federation SNI handling in main.rs, unknown peer
gets helpful "add to relay.toml" log message, recognized peers
handed off to FederationManager.
TODO: TLS fingerprint verification — currently outbound connections
use client_config() which doesn't present a cert, so inbound
verification fails. Need mutual TLS or URL-based peer matching.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
1. Wire protocol: add Opus 32k/48k/64k (CodecId 6/7/8) + STUDIO
profiles with is_opus() helper. Opus enc/dec accept all Opus variants.
2. JNI bridge: expand profile_from_int to 7 levels (0-6) mapping to
GOOD, DEGRADED, CATASTROPHIC, Codec2_3200, STUDIO_32K/48K/64K.
3. Settings UI: replace radio buttons with Material3 Slider — 7 stops
from Studio 64k (green) to Codec2 1.2k (dark red), matching desktop.
4. Key-change warning: AlertDialog on connect when server fingerprint
has changed. Shows old vs new fingerprint, Accept New Key or Cancel.
Accepting saves the new fingerprint and proceeds with the call.
5. Engine recv: handle studio codec IDs in auto-switch path.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add SettingsScreen with identity (alias, key backup/restore), audio defaults,
server management, network prefs, and default room
- SettingsRepository persists all settings via SharedPreferences
- Auto-generate random display names on first launch (e.g. "Swift Wolf")
- Thread alias through CallOffer → relay handshake → RoomUpdate broadcast
- Derive caller fingerprint from identity key in relay handshake (fixes null
fingerprints when --auth-url is not set)
- Persist identity seed for stable fingerprints across reconnects
- Add alias field to SignalMessage::CallOffer (serde default for backward compat)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add RoomUpdate signal message to wzp-proto with participant count + list
- Add RoomParticipant struct (fingerprint + optional alias)
- Store fingerprint/alias in relay Participant struct
- Broadcast RoomUpdate to all room members on join and leave
- Add signal recv task in Android engine to handle RoomUpdate
- Surface room_participant_count + room_participants in CallStats JSON
- Show "X in room" with participant names in Android in-call UI
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- New wzp-android crate with Oboe C++ backend, lock-free SPSC ring buffers,
engine orchestrator, codec pipeline, and Android Gradle project structure
- AEC (NLMS adaptive filter), AGC (two-stage with fast attack/slow release),
windowed-sinc FIR resampler replacing linear interpolation (wzp-codec)
- Opus encoder tuning: complexity 7 default, set_expected_loss support
- Mobile jitter buffer: asymmetric EMA (fast up/slow down), handoff spike
detection with 2s cooldown, configurable safety margin
- Network-aware quality control: cellular-specific thresholds, faster
downgrade on cellular, proactive tier drop on WiFi→cellular handoff,
FEC ratio boost during network transitions
- Handoff detection in PathMonitor via RTT jitter spike analysis
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
RelayLink: QUIC connection to peer relay (SNI "_relay") for forwarding
specific sessions. Methods: connect, forward, add/remove_session, is_idle.
RelayLinkManager: manages connections to multiple peers.
- get_or_connect: lazy connection establishment
- forward_to: send media packet to specific peer
- register/unregister_session: track which sessions use which links
- Auto-closes idle links on session unregister
Protocol: added SignalMessage::SessionForward { session_id,
target_fingerprint, source_relay } and SessionForwardAck { session_id,
room_name } for relay-link session setup signaling.
Building block for P3-T7 (call setup over mesh) which wires
route resolution + relay links + handshake into a complete flow.
62 relay tests + 42 proto tests passing (7 new relay_link tests).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
RouteResolver queries PresenceRegistry to determine how to reach a target:
- Route::Local — connected to this relay
- Route::DirectPeer(addr) — on a directly connected peer relay
- Route::Chain(addrs) — multi-hop (structure ready, single-hop for now)
- Route::NotFound — not in any known relay
Protocol: added SignalMessage::RouteQuery { fingerprint, ttl } and
RouteResponse { fingerprint, found, relay_chain } for peer-to-peer
route queries over probe connections.
HTTP API: GET /route/:fingerprint returns JSON with route type + chain.
Relay handles incoming RouteQuery on probe connections: looks up locally,
replies with RouteResponse. TTL decremented for future multi-hop forwarding.
55 relay tests + 42 proto tests passing (7 new route tests).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
PresenceRegistry tracks who is connected where:
- register_local/unregister_local for directly connected users
- update_peer for fingerprints reported by peer relays
- lookup returns Local or Remote(addr)
- expire_stale removes entries older than timeout
Gossip via probe connections:
- New SignalMessage::PresenceUpdate { fingerprints, relay_addr }
- Probes send local fingerprints every 10s alongside Ping/Pong
- Receiving relay updates its remote presence table
HTTP API on metrics port:
- GET /presence — all known fingerprints + locations
- GET /presence/:fingerprint — single lookup
- GET /peers — peer relays + their connected users
Wired into relay main:
- Registry created at startup
- register_local after auth+handshake
- unregister_local on disconnect
- Passed to probe mesh and metrics server
Also marks FC-10 as DONE in integration tracker.
48 relay tests + 42 proto tests passing.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
T6 wiring: Trunking in relay hot path
- TrunkedForwarder wraps transport with TrunkBatcher
- run_participant uses 5ms flush timer when trunking enabled
- send_trunk/recv_trunk on QuinnTransport
- --trunking flag on relay config
- 2 new tests: forwarder batches, auto-flush on full
T7 wiring: Mini-frames in encoder/decoder
- MediaPacket::encode_compact/decode_compact with MiniFrameContext
- CallEncoder sends mini-headers for consecutive frames (full every 50th)
- CallDecoder auto-detects full vs mini on receive
- mini_frames_enabled in CallConfig (default true)
- 3 new tests: encode/decode sequence, periodic full, disabled mode
Noise suppression (nnnoiseless/RNNoise)
- NoiseSupressor in wzp-codec: pure Rust ML-based noise removal
- Processes 960-sample frames as two 480-sample halves
- Integrated in CallEncoder before silence detection
- noise_suppression in CallConfig (default true)
- 4 new tests: creation, processing, SNR improvement, passthrough
T1-S4: Adaptive playout delay
- AdaptivePlayoutDelay: EMA-based jitter tracking (NetEq-inspired)
- Computes target_delay from observed inter-arrival jitter
- JitterBuffer::new_adaptive() uses adaptive delay
- adaptive_jitter in CallConfig (default true)
- 5 new tests: stable, jitter increase, recovery, clamping, estimate
272 tests passing across all crates.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
WZP-S-2: Relay token authentication
- New --auth-url flag: relay calls POST {url} with bearer token
- Clients must send SignalMessage::AuthToken as first signal
- Relay validates against featherChat's /v1/auth/validate endpoint
- Rejects unauthenticated clients before they join rooms
- New auth.rs module with validate_token() + tests
WZP-S-3: featherChat signaling bridge
- New featherchat.rs module for CallSignal interop
- WzpCallPayload: wraps SignalMessage + relay_addr + room name
- encode_call_payload/decode_call_payload for JSON serialization
- CallSignalType enum mirrors featherChat's variant
- signal_to_call_type maps WZP signals to FC types
Protocol: Added SignalMessage::AuthToken { token } variant
129 tests passing across all crates.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
