16793be36fdbe1acdceb75aa99b59a0448ce3be1
25 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Siavash Sameni
|
16793be36f |
fix(p2p): Phase 5.6 — direct-path head start + hangup propagation + media debug events
Three fixes from a field-test log where same-LAN calls were
still losing the dual-path race to the relay path, peers were
getting stuck on an empty call screen when the other side
hung up, and 1-way audio was hard to diagnose because the
GUI debug log had no media-level events.
## 1. Direct-path 500ms head start (dual_path.rs)
The race was resolving in ~105ms with Relay winning even when
both phones were on the same MikroTik LAN with valid IPv6 host
candidates. Root cause: the relay dial is a plain outbound QUIC
connect that completes in whatever the client→relay RTT is
(~100ms), while the direct path needs the PEER to also process
its CallSetup, spin up its own race, and complete at least one
LAN dial back to us. That cross-client sequence reliably takes
longer than 100ms, so relay always won.
Fix: delay the relay_fut with `tokio::time::sleep(500ms)` before
starting its connect. Same-LAN direct dials complete in 30-50ms
typically, so the head start gives direct plenty of time to win
cleanly. Users on setups where direct genuinely can't work
(LTE-to-LTE cross-carrier) pay 500ms extra on the relay fallback,
which is invisible for a call setup.
## 2. Hangup propagation via a new hangup_call command (lib.rs + main.ts)
The hangup button was calling `disconnect` which stopped the
local media engine but never sent a SignalMessage::Hangup to
the relay. The peer never got notified and was stuck on the
call screen with silent audio. My earlier fix (commit
|
||
|
Siavash Sameni
|
fa038df057 |
feat(p2p): Phase 5.5 — ICE LAN host candidates (IPv4 + IPv6)
Same-LAN P2P was failing because MikroTik masquerade (like most
consumer NATs) doesn't support NAT hairpinning — the advertised
WAN reflex addr is unreachable from a peer on the same LAN as
the advertiser. Phase 5 got us Cone NAT classification and fixed
the measurement artifact, but same-LAN direct dials still had
nowhere to land.
Phase 5.5 adds ICE-style host candidates: each client enumerates
its LAN-local network interface addresses, includes them in the
DirectCallOffer/Answer alongside the reflex addr, and the
dual-path race fans out to ALL peer candidates in parallel.
Same-LAN peers find each other via their RFC1918 IPv4 + ULA /
global-unicast IPv6 addresses without touching the NAT at all.
Dual-stack IPv6 is in scope from the start — on modern ISPs
(including Starlink) the v6 path often works even when v4
hairpinning doesn't, because there's no NAT on the v6 side.
## Changes
### `wzp_client::reflect::local_host_candidates(port)` (new)
Enumerates network interfaces via `if-addrs` and returns
SocketAddrs paired with the caller's port. Filters:
- IPv4: RFC1918 (10/8, 172.16/12, 192.168/16) + CGNAT (100.64/10)
- IPv6: global unicast (2000::/3) + ULA (fc00::/7)
- Skipped: loopback, link-local (169.254, fe80::), public v4
(already covered by reflex-addr), unspecified
Safe from any thread, one `getifaddrs(3)` syscall.
### Wire protocol (wzp-proto/packet.rs)
Three new `#[serde(default, skip_serializing_if = "Vec::is_empty")]`
fields, backward-compat with pre-5.5 clients/relays by
construction:
- `DirectCallOffer.caller_local_addrs: Vec<String>`
- `DirectCallAnswer.callee_local_addrs: Vec<String>`
- `CallSetup.peer_local_addrs: Vec<String>`
### Call registry (wzp-relay/call_registry.rs)
`DirectCall` gains `caller_local_addrs` + `callee_local_addrs`
Vec<String> fields. New `set_caller_local_addrs` /
`set_callee_local_addrs` setters. Follow the same pattern as
the reflex addr fields.
### Relay cross-wiring (wzp-relay/main.rs)
Both the local-call and cross-relay-federation paths now track
the local_addrs through the registry and inject them into the
CallSetup's peer_local_addrs. Cross-wiring is identical to the
existing peer_direct_addr logic — each party's CallSetup
carries the OTHER party's LAN candidates.
### Client side (desktop/src-tauri/lib.rs)
- `place_call`: gathers local host candidates via
`local_host_candidates(signal_endpoint.local_addr().port())`
and includes them in `DirectCallOffer.caller_local_addrs`.
The port match is critical — it's the Phase 5 shared signal
socket, so incoming dials to these addrs land on the same
endpoint that's already listening.
- `answer_call`: same, AcceptTrusted only (privacy mode keeps
LAN addrs hidden too, for consistency with the reflex addr).
- `connect` Tauri command: new `peer_local_addrs: Vec<String>`
arg. Builds a `PeerCandidates` bundle and passes it to the
dual-path race.
- Recv loop's CallSetup handler: destructures + forwards the
new field to JS via the signal-event payload.
### `dual_path::race` (wzp-client/dual_path.rs)
Signature change: takes `PeerCandidates` (reflex + local Vec)
instead of a single SocketAddr. The D-role branch now fans out
N parallel dials via `tokio::task::JoinSet` — one per candidate
— and the first successful dial wins (losers are aborted
immediately via `set.abort_all()`). Only when ALL candidates
have failed do we return Err; individual candidate failures are
just traced at debug level and the race waits for the others.
LAN host candidates are tried BEFORE the reflex addr in
`PeerCandidates::dial_order()` — they're faster when they work,
and the reflex addr is the fallback for the not-on-same-LAN
case.
### JS side (desktop/main.ts)
`connect` invoke now passes `peerLocalAddrs: data.peer_local_addrs ?? []`
alongside the existing `peerDirectAddr`.
### Tests
All existing test callsites updated for the new Vec<String>
fields (defaults to Vec::new() in tests — they don't exercise
the multi-candidate path). `dual_path.rs` integration tests
wrap the single `dead_peer` / `acceptor_listen_addr` in a
`PeerCandidates { reflexive: Some(_), local: Vec::new() }`.
Full workspace test: 423 passing (same as before 5.5).
## Expected behavior on the reporter's setup
Two phones behind MikroTik, both on the same LAN:
place_call:host_candidates {"local_addrs": ["192.168.88.21:XXX", "2001:...:YY:XXX"]}
recv:DirectCallAnswer {"callee_local_addrs": ["192.168.88.22:ZZZ", "2001:...:WW:ZZZ"]}
recv:CallSetup {"peer_direct_addr":"150.228.49.65:NN",
"peer_local_addrs":["192.168.88.22:ZZZ","2001:...:WW:ZZZ"]}
connect:dual_path_race_start {"peer_reflex":"...","peer_local":[...]}
dual_path: direct dial succeeded on candidate 0 ← LAN v4 wins
connect:dual_path_race_won {"path":"Direct"}
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
|
||
|
Siavash Sameni
|
1618ff6c9d |
feat(p2p): Phase 5 — single-socket architecture (Nebula-style)
Before Phase 5 WarzonePhone used THREE separate UDP sockets per
client:
1. Signal endpoint (register_signal, client-only)
2. Reflect probe endpoints (one fresh socket per relay probe)
3. Dual-path race endpoint (fresh per call setup)
This broke two things in production on port-preserving NATs
(MikroTik masquerade, most consumer routers):
a. Phase 2 NAT detection was WRONG. Each probe used a fresh
internal port, so MikroTik mapped each one to a different
external port, and the classifier saw "different port per
relay" and labeled it SymmetricPort. The real NAT was
cone-like but measurement via fresh sockets hid that.
b. Phase 3.5 dual-path P2P race was BROKEN. The reflex addr
we advertised in DirectCallOffer was observed by the signal
endpoint's socket. The actual dual-path race listened on a
DIFFERENT fresh socket, on a different internal (and
therefore external) port. Peers dialed the advertised addr
and hit MikroTik's mapping for the signal socket, which
forwarded to the signal endpoint — a client-only endpoint
that doesn't accept incoming connections. Direct path
silently failed, relay always won the race.
Nebula-style fix: one socket for everything. The signal endpoint
is now dual-purpose (client + server_config), and both the
reflect probes and the dual-path race reuse it instead of
creating fresh ones. MikroTik's port-preservation then gives us
a stable external port across all flows → classifier correctly
sees Cone NAT → advertised reflex addr is the actual listening
port → direct dials from peers land on the right socket →
`endpoint.accept()` in the A-role branch of the dual-path race
picks up the incoming connection.
## Changes
### `register_signal` (desktop/src-tauri/src/lib.rs)
- Endpoint now created with `Some(server_config())` instead of
`None`. The socket can now accept incoming QUIC connections as
well as dial outbound.
- Every code path that previously read `sig.endpoint` for the
relay-dial reuse benefits automatically — same socket is now
ALSO listening for peer dials.
### `probe_reflect_addr` (wzp-client/src/reflect.rs)
- New `existing_endpoint: Option<Endpoint>` arg. `Some` reuses
the caller's socket (production: pass the signal endpoint).
`None` creates a fresh one (tests + pre-registration).
- Removed the `drop(endpoint)` at the end — was correct for
fresh endpoints (explicit early socket close) but incorrect
for shared ones. End-of-scope drop does the right thing in
both cases via Arc semantics.
### `detect_nat_type` (wzp-client/src/reflect.rs)
- New `shared_endpoint: Option<Endpoint>` arg, forwarded to
every probe in the JoinSet fan-out. One shared socket means
the classifier sees the true NAT type.
### `detect_nat_type` Tauri command (desktop/src-tauri/src/lib.rs)
- Reads `state.signal.endpoint` and passes it as the shared
endpoint. Falls back to None when not registered. NAT detection
now produces accurate classifications against MikroTik / most
consumer NATs.
### `dual_path::race` (wzp-client/src/dual_path.rs)
- New `shared_endpoint: Option<Endpoint>` arg.
- A-role: when `Some`, reuses it for `accept()`. This is the
critical change — the reflex addr advertised to peers is now
the address listening for incoming direct dials.
- D-role: when `Some`, reuses it for the outbound direct dial.
MikroTik keeps the same external port for the dial as for
the signal flow → direct dial through a cone-mapped NAT.
- Relay path: also reuses the shared endpoint so MikroTik has
a single consistent mapping across the whole call (saves one
extra external port and makes firewall traces cleaner).
- When `None`, falls back to fresh per-role endpoints as before.
### `connect` Tauri command (desktop/src-tauri/src/lib.rs)
- Reads `state.signal.endpoint` once when acquiring own reflex
addr and passes it through to `dual_path::race`.
### Tests
- `wzp-client/tests/dual_path.rs` and
`wzp-relay/tests/multi_reflect.rs` updated to pass `None` for
the new endpoint arg — tests use fresh sockets and that's
fine because the loopback harness doesn't care about
port-preserving NAT behavior.
Full workspace test: 423 passing (no regressions).
## Expected behavior after this commit on real hardware
Behind MikroTik + Starlink-bypass (the reporter's setup):
- Phase 2 NAT detect → **Cone NAT** (was SymmetricPort — false
positive from the measurement artifact)
- Phase 3.5 direct-P2P dial → succeeds for both cone-cone and
cone-CGNAT cases where the remote side was previously blocked
by our own socket mismatch
- LTE ↔ LTE cross-carrier → still likely relay fallback; that's
genuinely strict symmetric and needs Phase 5.5 port prediction.
## Phase 5.5 (next, separate PRD)
Multi-candidate port prediction + ICE-style candidate aggregation
for truly strict symmetric NATs. Not needed for the 95% case —
Phase 5 alone fixes most consumer-router setups.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
|
||
|
Siavash Sameni
|
b7a48bf13b |
feat(ui): incoming-call ring tone + system notification
Previously: incoming calls silently popped an "Accept/Reject" panel. Easy to miss — no audible cue, no system-level alert if the app was backgrounded. Now the incoming-call path triggers both a synthesized ring tone and a system notification banner. ## Ring tone (desktop/src/main.ts) New `Ringer` class using Web Audio API directly — no external asset files, no new npm dep. Synthesizes a classic NANP two-tone cadence (440Hz + 480Hz sine mix, 2s tone + 4s silence, looped) through an envelope-gated gain node that ramps on/off to avoid clicks. Audible on every Tauri-supported platform because WebView carries Web Audio. - `start()` — lazily creates AudioContext on first use (platforms that require a user gesture for AudioContext creation still work because the incoming-call event is user-adjacent from the webview's perspective), starts setInterval(6000) loop. - `stop()` — clears the timer AND disconnects any active oscillators so there's no tail audio. - Active-nodes array is swept every cycle so it doesn't grow unbounded across long rings. Hooked into signal-event handlers: - `"incoming"` → `ringer.start()` + notifyIncomingCall - `"answered"`, `"setup"`, `"hangup"` → `ringer.stop()` - Accept/Reject button click handlers → `ringer.stop()` as the first thing they do (before any await) ## System notification (desktop/src-tauri + main.ts) Added `tauri-plugin-notification = "2"` to the Tauri app and registered in the builder. Capabilities updated with the four notification permissions. Frontend calls the plugin commands via the generic `invoke` instead of adding `@tauri-apps/plugin-notification` as a JS dep — Tauri plugins expose `plugin:notification|notify` etc. directly. Flow: 1. `is_permission_granted` — check cached 2. If not granted → `request_permission` (Android prompts the user once, cached thereafter) 3. `notify` with title="Incoming call", body="From <alias>" All wrapped in try/catch with console.debug fallback — plugin missing or permission denied is non-fatal, the visible panel + ring tone still alert the user. ## Known gaps (deferred) - Android native system ringtone (RingtoneManager) + full- screen intent for lockscreen-visible ringer. Requires platform-specific Java/Kotlin glue in the Tauri Android shell — bigger lift. - Desktop window flash / taskbar attention-seek on incoming call when app is backgrounded. - Vibration pattern on Android. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
Siavash Sameni
|
20375eceb9 |
feat(signal): transparent reconnect + auto-swap on relay change
Two related UX fixes, same state-machine surface: 1. Relay drops / goes offline / restarts: the client now auto- reconnects in the background instead of silently falling to "not registered" and requiring the user to tap Deregister + Register. 2. User switches relay in settings: client auto-swaps — close old transport, register against new, all transparent. ## Signal state additions (desktop/src-tauri/src/lib.rs) - `SignalState.desired_relay_addr: Option<String>` — what the user CURRENTLY wants. `Some(x)` means "keep me connected to x", `None` means "user explicitly asked for idle". This is the pivot that distinguishes "connection dropped, retry" from "user deregistered, stop". - `SignalState.reconnect_in_progress: bool` — single-flight guard so concurrent triggers (recv-loop exit + manual register_signal + another recv-loop exit after a brief success) don't spawn duplicate supervisors. ## Refactor The old `register_signal` Tauri command was doing the whole connect + Register + spawn-recv-loop flow inline. Split into: - `internal_deregister(signal_state, keep_desired)` — shared teardown helper that nulls out transport/endpoint/call state and optionally clears `desired_relay_addr`. - `do_register_signal(signal_state, app, relay)` — core connect + register + spawn-recv-loop flow, callable from both the Tauri command and the reconnect supervisor. Returns an explicit `impl Future<...> + Send` to avoid auto-trait inference bailing inside the tokio::spawn chain (rustc loses the Send trail through the recv-loop spawn inside the fn body). - `register_signal` Tauri command — now thin: if already registered to the same relay, no-op; otherwise internal_deregister(keep_desired=false), set desired_relay_addr = Some(new), call do_register_signal. The Rust side handles the "change of server" transition entirely on its own, no deregister+register dance from JS needed. - `deregister` Tauri command — internal_deregister(keep_desired = false) so the recv-loop exit path sees the cleared desired addr and does NOT spawn a supervisor. ## Reconnect supervisor New `signal_reconnect_supervisor(signal_state, app, relay)` task. Spawned from the recv-loop exit path when the loop exits unexpectedly AND `desired_relay_addr.is_some()` AND no supervisor is already running. - Exponential backoff: 1s, 2s, 4s, 8s, 15s, 30s (capped at 30s, never gives up). First attempt is immediate (attempt 0 skips the wait). - On each iteration checks whether `desired_relay_addr` was cleared (user deregistered mid-flight) or another path already re-registered; either short-circuits the supervisor. - Also detects if the user changed relays while the supervisor was sleeping — resets the backoff counter and retries against the new addr. - On success, exits so the newly-spawned recv loop owns the connection from that point. If THAT drops again, a fresh supervisor spawns. - Emits `call-debug-log` and `signal-event` events at every state transition so the GUI can display "reconnecting...", "registered" banners. ## UI wiring (desktop/src/main.ts) - signal-event handler gets two new cases: - `"reconnecting"` — amber "🔄 reconnecting to <relay>…" in the registered banner area - `"registered"` — green "✓ registered (<fp prefix>…)" to clear the reconnecting badge - Relay-selection click handler checks if a signal is currently registered and, if the user picked a different relay, fires `register_signal` with the new address. Rust side handles the swap transparently. Full workspace test: 423 passing (no regressions). Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
Siavash Sameni
|
da08723fe7 |
fix(signal): forward-compat — log+continue on unknown SignalMessage variants
Both sides of the signal channel previously broke their recv loop on any deserialize error, which meant adding a new variant in one build silently killed signal connections from peers running an older build. This bit us during Phase 1 testing: a new client sending SignalMessage::Reflect to a pre-Phase-1 relay caused the relay to drop the whole signal connection, which looked like "Error: not registered" on the next place_call. Fix: - New TransportError::Deserialize(String) variant in wzp-proto carries serde errors as a distinct category. - wzp-transport/reliable.rs::recv_signal returns Deserialize on serde_json::from_slice failures (was wrapped in Internal). - wzp-relay/main.rs signal loop matches on Deserialize → warn + continue (instead of break). - desktop/src-tauri/lib.rs recv loop does the same. Other TransportError variants (ConnectionLost, Io, Internal) still break the loop — only pure parse failures are recoverable. This means future SignalMessage variant additions are backward- compat by construction: older peers will see "unknown variant, continuing" in their logs while newer peers can keep evolving the protocol. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
Siavash Sameni
|
59ce52f8e8 |
feat(p2p): Phase 3.5 dual-path QUIC race + GUI call-flow debug logs
Two features in one commit because they ship and test together:
Phase 3.5 closes the hole-punching loop and the call-flow debug
logs give the user live visibility into every step of a call so
real-hardware testing of the new P2P path is debuggable.
## Phase 3.5 — dual-path QUIC connect race
Completes the hole-punching work Phase 3 scaffolded. On receiving
a CallSetup with peer_direct_addr, the client now actually races a
direct QUIC handshake against the relay dial and uses whichever
completes first. Symmetric role assignment avoids the two-conns-
per-call problem:
- Both peers compare `own_reflex_addr` vs `peer_reflex_addr`
lexicographically.
- Smaller addr → **Acceptor** (A-role): builds a server-capable
dual endpoint, awaits an incoming QUIC session. Does NOT dial.
- Larger addr → **Dialer** (D-role): builds a client-only
endpoint, dials the peer's addr with `call-<id>` SNI. Does NOT
listen.
- Both sides always dial the relay in parallel as fallback.
- `tokio::select!` with `biased` preference for direct, `tokio::pin!`
so each branch can await the losing opposite as fallback.
- Direct timeout 2s, relay fallback timeout 5s (so 7s worst case
from CallSetup to "no media path" error).
New crate module `wzp_client::dual_path::{race, WinningPath}`
(moved here from desktop/src-tauri so it's testable from a
workspace test). `determine_role` in `wzp_client::reflect` is
pure-function and unit-tested.
### CallEngine integration
- New `pre_connected_transport: Option<Arc<QuinnTransport>>` arg
on both android + desktop `CallEngine::start` branches. Skips
the internal wzp_transport::connect step when Some. Backward-
compat: None keeps Phase 0 relay-only behavior.
- `connect` Tauri command reads own_reflex_addr from SignalState,
computes role, runs the race, passes the winning transport
into CallEngine. If ANY input is missing (no peer addr, no own
addr, equal addrs), falls back to classic relay path —
identical to pre-Phase-3.5 behavior.
### Tests (9 new, all passing)
- 6 unit tests for `determine_role` truth table in
`wzp-client/src/reflect.rs` (smaller=Acceptor, larger=Dialer,
port-only diff, equal, missing-side, symmetry)
- 3 integration tests in `crates/wzp-client/tests/dual_path.rs`:
* `dual_path_direct_wins_on_loopback` — two-endpoint test
rig, Dialer wins direct path vs loopback mock relay
* `dual_path_relay_wins_when_direct_is_dead` — dead peer
port, 2s direct timeout, relay fallback wins
* `dual_path_errors_cleanly_when_both_paths_dead` — <10s
error, no hang
## GUI call-flow debug logs
Runtime-toggled structured events at every step of a call so the
user can see where a call progressed or stalled on real hardware.
Modeled on the existing DRED_VERBOSE_LOGS pattern.
### Rust side
- `static CALL_DEBUG_LOGS: AtomicBool` + `emit_call_debug(&app,
step, details)` helper. Always logs via `tracing::info!`
(logcat always has a copy); GUI Tauri `call-debug-log` event
only fires when the flag is on.
- Tauri commands `set_call_debug_logs` / `get_call_debug_logs`.
### Instrumented steps (24 emit_call_debug sites)
- `register_signal`: start, identity loaded, endpoint created,
connect failed/ok, RegisterPresence sent, ack received/failed,
recv loop spawning
- Recv loop: CallRinging, DirectCallOffer (w/ caller_reflexive_addr),
DirectCallAnswer (w/ callee_reflexive_addr), CallSetup (w/
peer_direct_addr), Hangup
- `place_call`: start, reflect query start/ok/none, offer sent,
send failed
- `answer_call`: start, reflect query start/ok/none or privacy
skip, answer sent, send failed
- `connect`: start, dual_path_race_start (w/ role), won (w/
path), failed, skipped (w/ reasons), call_engine_starting/
started/failed
### JS side
- New `callDebugLogs: boolean` field on Settings type.
- Boot-time hydrate of the Rust flag from localStorage so the
choice survives restarts (like `dredDebugLogs`).
- Settings panel: new "Call flow debug logs" checkbox alongside
the DRED toggle.
- New "Call Debug Log" section that ONLY shows when the flag is
on. Rolling in-memory buffer of the last 200 events, rendered
as monospace `HH:MM:SS.mmm step {details}` lines with auto-
scroll and a Clear button.
- `listen("call-debug-log", ...)` subscribed at app startup,
appends to the buffer, re-renders on every event.
Full workspace test goes from 404 → 413 passing. Clippy clean
on touched crates.
PRD: .taskmaster/docs/prd_phase35_dual_path_race.txt
Tasks: 61-69 all completed
Next: APK + desktop build carrying everything — Phase 2 NAT
detect, Phase 3 advertising, Phase 3.5 dual-path + call debug
logs, plus the earlier Android first-join diagnostics — so the
user can validate the P2P path on real hardware with live
per-step visibility into where any failures happen.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
|
||
|
Siavash Sameni
|
39277bf3a0 |
feat(hole-punching): advertise peer reflexive addrs in DirectCall flow — Phase 3
Completes the signal-plane plumbing for P2P direct calling: both
peers now learn their own server-reflexive address (Phase 1
Reflect), include it in DirectCallOffer / DirectCallAnswer, and
the relay cross-wires them into each side's CallSetup so the
client knows the OTHER party's direct addr. Dual-path QUIC race
is scaffolded but deferred to Phase 3.5 — this commit ships the
full advertising layer so real-hardware testing can confirm the
addrs flow end-to-end before adding the concurrent-connect logic.
Wire protocol (wzp-proto/src/packet.rs):
- DirectCallOffer gains optional `caller_reflexive_addr`
- DirectCallAnswer gains optional `callee_reflexive_addr`
- CallSetup gains optional `peer_direct_addr`
- All #[serde(default, skip_serializing_if = "Option::is_none")] so
pre-Phase-3 peers and relays stay backward compatible by
construction — the new fields are elided from the JSON on the
wire when None, and older clients parse the JSON ignoring any
fields they don't know.
- 2 new roundtrip tests (Some + None cases, old-JSON parse-back).
Call registry (wzp-relay/src/call_registry.rs):
- DirectCall gains caller_reflexive_addr + callee_reflexive_addr.
- set_caller_reflexive_addr / set_callee_reflexive_addr setters.
- 2 new unit tests: stores and returns addrs, clearing works.
Relay cross-wiring (wzp-relay/src/main.rs):
- On DirectCallOffer: stash the caller's addr in the registry.
- On DirectCallAnswer: stash the callee's addr (only set by
AcceptTrusted answers — privacy-mode leaves it None).
- Send two different CallSetup messages: one to the caller with
peer_direct_addr=callee_addr, and one to the callee with
peer_direct_addr=caller_addr. The cross-wiring means each side
gets the OTHER party's direct addr, not its own.
- Logs `p2p_viable=true` when both sides advertised.
Client advertising (desktop/src-tauri/src/lib.rs):
- New `try_reflect_own_addr` helper that reuses the Phase 1
oneshot pattern WITHOUT holding state.signal.lock() across the
await (critical: the recv loop reacquires the same mutex to
fire the oneshot, so holding it would deadlock).
- `place_call` queries reflect first and includes the returned
addr in DirectCallOffer. Falls back to None on any failure —
call still proceeds via the relay path.
- `answer_call` queries reflect ONLY on AcceptTrusted so
AcceptGeneric keeps the callee's IP private by design. Reject
and AcceptGeneric both pass None.
- recv loop's CallSetup handler destructures and forwards
peer_direct_addr to the JS layer in the signal-event payload.
Client scaffolding for dual-path (desktop/src-tauri/src/lib.rs +
desktop/src/main.ts):
- `connect` Tauri command gets a new optional `peer_direct_addr`
argument. Currently LOGS the addr but still uses the relay
path for the media connection — Phase 3.5 will swap in a
tokio::select! race between direct dial + relay dial. Scaffolding
lands here so the JS wire is stable, real-hardware testing can
confirm advertising works end-to-end, and Phase 3.5 is a pure
Rust change with no JS touches.
- JS setup handler forwards `data.peer_direct_addr` to invoke.
Back-compat with the CLI client (crates/wzp-client/src/cli.rs):
- CLI test harness updated for the new fields — always passes
None for both reflex addrs (no hole-punching). Also destructures
peer_direct_addr: _ in its CallSetup handler.
Tests (8 new, all passing):
- wzp-proto: hole_punching_optional_fields_roundtrip,
hole_punching_backward_compat_old_json_parses
- wzp-relay call_registry: call_registry_stores_reflexive_addrs,
call_registry_clearing_reflex_addr_works
- wzp-relay integration: crates/wzp-relay/tests/hole_punching.rs
* both_peers_advertise_reflex_addrs_cross_wire_in_setup
* privacy_mode_answer_omits_callee_addr_from_setup
* pre_phase3_caller_leaves_both_setups_relay_only
* neither_peer_advertises_both_setups_are_relay_only
Full workspace test goes from 396 → 404 passing.
PRD: .taskmaster/docs/prd_hole_punching.txt
Tasks: 53-60 all completed (58 = scaffolding-only; 3.5 follow-up)
Next up: **Phase 3.5 — dual-path QUIC connect race**. With the
advertising layer live, this becomes a focused change: on
CallSetup-with-peer_direct_addr, start a server-capable dual
endpoint, and tokio::select! across (direct dial, relay dial,
inbound accept). Whichever QUIC handshake completes first wins,
the losers drop, 2s direct timeout falls back to relay.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
|
||
|
Siavash Sameni
|
8d903f16c6 |
feat(reflect): multi-relay NAT type detection — Phase 2
Builds on Phase 1's SignalMessage::Reflect to probe N relays in
parallel through transient QUIC connections and classify the
client's NAT type for the future P2P hole-punching path. No wire
protocol changes — Phase 1's Reflect/ReflectResponse pair is
reused unchanged.
New client-side module (crates/wzp-client/src/reflect.rs):
- probe_reflect_addr(relay, timeout_ms): opens a throwaway
quinn::Endpoint (fresh ephemeral source port per probe,
essential for NAT-type detection — sharing one endpoint would
make a symmetric NAT look like a cone NAT), connects to _signal,
sends RegisterPresence with zero identity, consumes the Ack,
sends Reflect, awaits ReflectResponse, cleanly closes.
- detect_nat_type(relays, timeout_ms): parallel probes via
tokio::task::JoinSet (bounded by slowest probe not sum) and
returns a NatDetection with per-probe results + aggregate
classification.
- classify_nat(probes): pure-function classifier split out for
network-free unit tests. Rules:
* 0-1 successful probes → Unknown
* 2+ successes, same ip same port → Cone (P2P viable)
* 2+ successes, same ip diff ports → SymmetricPort (relay)
* 2+ successes, different ips → Multiple (treat as
symmetric)
Tauri command (desktop/src-tauri/src/lib.rs):
- detect_nat_type({ relays: [{ name, address }] }) -> NatDetection
as JSON. Takes the relay list from JS because localStorage
owns the config. Parse-up-front so a malformed entry fails
clean instead of as a probe error. 1500ms per-probe timeout.
UI (desktop/index.html + src/main.ts):
- New "NAT type" row + "Detect NAT" button in the Network
settings section. Renders per-probe status (name, address,
observed addr, latency, or error) plus the colored verdict:
* green Cone — shows consensus addr
* amber SymmetricPort / Multiple — must relay
* gray Unknown — not enough data
Tests:
- 7 unit tests in wzp-client/src/reflect.rs covering every
classifier branch (empty, 1 success, 2 identical, 2 diff ports,
2 diff ips, success+failure mix, pure-failure).
- 3 integration tests in crates/wzp-relay/tests/multi_reflect.rs:
* probe_reflect_addr_happy_path — single mock relay end-to-end
* detect_nat_type_two_loopback_relays_is_cone — two concurrent
relays, asserts both see 127.0.0.1 and classifier returns
Cone or SymmetricPort (accepted because the test harness
uses fresh ephemeral ports per probe which look like
SymmetricPort on single-host loopback)
* detect_nat_type_dead_relay_is_unknown — alive + dead port
mix, asserts the dead probe surfaces an error string and
the aggregator returns Unknown (only 1 success)
Full workspace test goes from 386 → 396 passing.
PRD: .taskmaster/docs/prd_multi_relay_reflect.txt
Tasks: 47-52 all completed
Next up: hole-punching (Phase 3) — use the reflected address in
DirectCallOffer/Answer and CallSetup so peers attempt a direct
QUIC handshake to each other, with relay fallback on timeout.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
|
||
|
Siavash Sameni
|
921856eba9 |
feat(reflect): QUIC-native NAT reflection ("STUN for QUIC") — Phase 1
Lets a client ask its registered relay "what IP:port do you see for
me?" over the existing TLS-authenticated signal channel, returning
the client's server-reflexive address as a SocketAddr. Replaces the
need for a classic STUN deployment and becomes the bootstrap step
for future P2P hole-punching: once both peers know their own reflex
addrs, they can advertise them in DirectCallOffer and attempt a
direct QUIC handshake to each other.
Wire protocol (wzp-proto):
- SignalMessage::Reflect — unit variant, client -> relay
- SignalMessage::ReflectResponse { observed_addr: String } — relay -> client
- JSON-serde, appended at end of enum: zero ordinal concerns,
backward compat with pre-Phase-1 relays by construction (older
relays log "unexpected message" and drop; newer clients time out
cleanly within 1s).
Relay handler (wzp-relay/src/main.rs, signal loop):
- New match arm next to Ping reuses the already-bound `addr` from
connection.remote_address() and replies with observed_addr as a
string. debug!-level log on success, warn!-level on send failure.
Client side (desktop/src-tauri/src/lib.rs):
- SignalState gains pending_reflect: Option<oneshot::Sender<SocketAddr>>.
- get_reflected_address Tauri command installs the oneshot before
sending Reflect and awaits it with a 1s timeout; cleans up on
every exit path (send failure, timeout, parse error).
- recv loop's new ReflectResponse arm fires the pending sender or
emits a debug log for unsolicited responses — never crashes the
loop on malformed input.
- Integrated into invoke_handler! alongside the other signal
commands.
UI (desktop/index.html + src/main.ts):
- New "Network" section in settings panel with a "Detect" button
that displays the reflected address or a categorized warning
("register first" / "relay does not support reflection" / error).
Tests (crates/wzp-relay/tests/reflect.rs — 3 new, all passing):
- reflect_happy_path: client on loopback gets back 127.0.0.1:<its own port>
- reflect_two_clients_distinct_ports: two concurrent clients see
their own distinct ports, proving per-connection remote_address
- reflect_old_relay_times_out: mock relay that ignores Reflect —
client times out between 1000-1200ms and does not hang
Also pre-existing test bit-rot unrelated to this PR — fixed so the
full workspace `cargo test` goes green:
- handshake_integration tests in wzp-client, wzp-relay and
featherchat_compat in wzp-crypto all missed the `alias` field
addition to CallOffer and the 3-arg form of perform_handshake
plus 4-tuple return of accept_handshake. Updated to the current
API surface.
Results:
cargo test --workspace --exclude wzp-android: 386 passed
cargo check --workspace: clean
cargo clippy: no new warnings in touched files
Verification excludes wzp-android because it's dead code on this
branch (Tauri mobile uses wzp-native instead) and can't link -llog
on macOS host — unchanged status quo.
PRD: .taskmaster/docs/prd_reflect_over_quic.txt
Tasks: 39-46 all completed
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
|
||
|
Siavash Sameni
|
578ff8cff4 |
feat(debug): GUI toggle for DRED verbose logs + macOS mic permission
DRED verbose logs (off by default — keeps logcat clean in normal use): - wzp-codec: DRED_VERBOSE_LOGS atomic flag with dred_verbose_logs() / set_dred_verbose_logs() helpers - opus_enc: gate "DRED enabled" + libopus version logs behind the flag - desktop/src-tauri/engine.rs: gate DredRecvState parse log, reconstruction log, classical PLC log, and DRED-counter fields in the Android recv heartbeat (non-verbose path still logs basic recv stats) - Tauri commands set_dred_verbose_logs / get_dred_verbose_logs - Settings panel gets a "DRED debug logs (verbose, dev only)" checkbox; preference persists in wzp-settings localStorage and is pushed to Rust on save and on app boot macOS mic permission: - Add desktop/src-tauri/Info.plist with NSMicrophoneUsageDescription. Without it, modern macOS silently denies CoreAudio capture for ad-hoc-signed Tauri builds — capture starts but every callback hands you zeros. Symptom: phones could not hear desktop client, desktop could still hear phones (playout has no TCC gate). The Tauri 2 bundler auto-merges this file into WarzonePhone.app's Contents/Info.plist on the next build, so first launch will pop the standard mic prompt. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
Siavash Sameni
|
510eae2089 |
feat(direct-call): call history, recent contacts, deregister button
Persistent JSON-backed call history for the direct-call screen so users
can see what they've placed / received / missed and dial back with one
click. Also fixes two small latent UX issues reported alongside.
Backend (Rust)
- new crate/module desktop/src-tauri/src/history.rs: thread-safe in-
process store (OnceLock<RwLock<Vec<CallHistoryEntry>>>) backed by
<APP_DATA_DIR>/call_history.json. Atomic writes via temp+rename. Max
200 entries, FIFO pruning. CallDirection { Placed, Received, Missed }.
- Log hooks in the signal loop + commands:
* place_call → Placed entry (with target fingerprint)
* DirectCallOffer → Missed entry up front; upgraded to Received
inside answer_call when accept_mode != Reject
via history::mark_received_if_pending(call_id).
If user rejects or never answers, it stays Missed.
- New Tauri commands:
* get_call_history() → all entries, newest first
* get_recent_contacts() → unique peers by fp, newest interaction first
* clear_call_history() → wipes JSON + in-memory
* deregister() → tears down signal transport + endpoint
Backend emits `history-changed` events so the UI can live-refresh
without polling.
Frontend (main.ts + index.html + style.css)
- Direct-call panel now has:
* Recent contacts chip row (top 6 unique peers). Click a chip → dial.
* Call history list (up to 50 rows). Direction icon (↗ placed, ↙
received, ✗ missed), peer alias/fp, relative timestamp, callback
button. Both click handlers populate target-fp and fire place_call.
* Deregister button in the "registered" header — calls the new
deregister command, tears down the signal transport, returns the
UI to the pre-register state.
* Clear-history link in the history header.
- Subscribes to `history-changed` events so the list updates the moment
the backend logs a new entry. Also refreshed on register + after a
clear.
- Nothing is rendered until there is data — empty sections stay hidden.
Tasks #20 + #21 (small UX items bundled in)
- Default room "general" for new installations: the html input value
attribute is now "general" and loadSettings() defaults match. Existing
users' localStorage still wins.
- Random alias on desktop: already latent but confirmed working — the
startup IIFE at main.ts:374 calls get_app_info() and prefills the
alias input from derive_alias(seed) when the input is empty. No code
change needed, just verified it flows through the same path as the
Android client.
Known follow-ups (deferred to step 6 polish)
- Call duration tracking (currently all entries have no duration field)
- Hangup signal from an unanswered incoming should emit history-changed
so the missed state is visible even when the user never tapped accept
- Android UI layout fit-check on the smaller Nothing screen
|
||
|
Siavash Sameni
|
76a4c53e21 |
fix(android-audio): spawn_blocking for Oboe restart — unblock tokio executor
Build
|
||
|
Siavash Sameni
|
4c6aac654a |
fix(android-audio): restart Oboe on speakerphone toggle + unbreak button UI
Build
|
||
|
Siavash Sameni
|
0178cbd91d |
android(audio): Speaker button toggles earpiece↔speaker via JNI (WIP, untested)
Build
|
||
|
Siavash Sameni
|
49f101d785 |
fix(android): reuse signal endpoint for direct-call media connection
Direct-call accept hangs forever at the QUIC handshake on Android. Logs
from
|
||
|
Siavash Sameni
|
d7b37a5749 |
diag: tracing for direct-call signal loop + CallEngine::start stages
User reports tapping "answer" on an incoming direct call does nothing
visible, and suspects the same may affect desktop. The signal recv loop
had no tracing at all, so we can't tell whether CallSetup is being
received, whether the recv loop died silently, or whether
CallEngine::start is failing between "identity loaded" and
"connected to relay, handshake complete".
- register_signal recv loop now logs every message type with fields
(CallRinging, DirectCallOffer, DirectCallAnswer, CallSetup, Hangup,
unhandled), plus a warn! on recv errors and a final warn when the
loop exits.
- place_call / answer_call commands log entry + success / error. The
answer_call error path logs the underlying send_signal error so we
can see it in logcat instead of only in the JS error toast.
- CallEngine::start android branch logs relay/room/alias on entry,
logs "endpoint created, dialing relay" between create_endpoint and
connect, "QUIC connection established, performing handshake" between
connect and perform_handshake, and promotes all three potential
failures to explicit error! logs so a silent hang / error becomes
visible in logcat.
No functional changes — pure diagnostics. Stacks on
|
||
|
Siavash Sameni
|
5beea7de40 |
phase 3(android): unify connect/disconnect/toggle_*/get_status commands
Step 3 of the Tauri Android rewrite was still returning "audio backend not
yet wired on Android (step 3)" because the cfg-gated Android stubs for
connect/disconnect/toggle_mic/toggle_speaker/get_status were shadowing the
real commands. Now that CallEngine::start() has a real Android body (phase
3, commit
|
||
|
Siavash Sameni
|
fdbe502524 |
phase 3(android): wire CallEngine::start to wzp-native audio FFI
Replaces the Android-side CallEngine::start() stub with a real implementation that mirrors the desktop start() body but routes all PCM through the standalone wzp-native cdylib loaded at startup via libloading instead of using CPAL. - desktop/src-tauri/src/wzp_native.rs: new module with a static OnceLock<libloading::Library> + cached raw fn pointers for every symbol we need (version, hello, audio_start/stop, read_capture, write_playout, is_running, capture/playout_latency_ms). init() resolves everything once at startup; accessors return default values if init() never ran. - desktop/src-tauri/src/lib.rs: drop the inline dlopen smoke test, add `mod wzp_native;` behind target_os="android", and invoke wzp_native::init() from the Tauri setup() callback so the library is loaded + all symbols cached before any CallEngine can touch audio. - desktop/src-tauri/src/engine.rs: the Android #[cfg] branch of CallEngine::start() now does the full QUIC handshake + signal loop + Opus send/recv tasks, calling wzp_native::audio_start() / audio_read_capture() / audio_write_playout() instead of the desktop CPAL rings. SyncWrapper now holds a placeholder Box<()> on Android because the audio backend lives in a process-global singleton inside libwzp_native.so rather than being owned per-engine. Next step: build #39 on the remote docker builder and smoke-test on Pixel 6 that the Connect button in the UI successfully brings up Oboe and streams audio through the dlopen boundary. |
||
|
Siavash Sameni
|
7cc53aedc7 |
refactor(android): split C++ into wzp-native cdylib, loaded at runtime
Phase 1 of the big refactor. Escape the Tauri Android __init_tcb+4 symbol leak (rust-lang/rust#104707) by making wzp-desktop's Android .so pure Rust — ZERO cc::Build, no cpp/ files, no C++ in the rustc link step. All future C++ (Oboe audio bridge) lives in a new standalone cdylib crate `wzp-native` which is built with cargo-ndk (the same path the legacy wzp-android crate uses successfully on the same phone + same NDK), copied into Tauri's gen/android/app/src/main/jniLibs at build time, and dlopened by wzp-desktop at runtime via libloading. Changes in this commit: - NEW crate crates/wzp-native/ with crate-type = ["cdylib"] only (no staticlib, no rlib — rust#104707 shows mixing staticlib with cdylib leaks non-exported symbols, which is the original bug source). Phase 1 scaffold has TWO extern "C" functions: wzp_native_version() -> i32 (returns 42) wzp_native_hello(buf, cap) -> usize (writes a string) So we can verify dlopen + dlsym + cross-.so FFI end-to-end before adding any real C++. - desktop/src-tauri/cpp/ directory DELETED (7 files gone). - desktop/src-tauri/build.rs reduced to just the git hash capture + tauri_build::build(). No more cc::Build of any kind. - desktop/src-tauri/Cargo.toml: drop cc from build-dependencies, add libloading = "0.8" as an Android-only runtime dep. - desktop/src-tauri/src/lib.rs Builder::setup() now (on Android only) dlopens libwzp_native.so, calls wzp_native_version() and wzp_native_hello(), and logs the result: "wzp-native dlopen OK: version=42 msg=\"hello from wzp-native\"" If this log appears in logcat when the app launches and the home screen still renders, the split-cdylib pipeline is validated and Phase 2 (port the Oboe bridge into wzp-native) can proceed. - scripts/build-tauri-android.sh: insert a `cargo ndk -t arm64-v8a build --release -p wzp-native` step before `cargo tauri android build`, with `-o desktop/src-tauri/gen/android/app/src/main/jniLibs` so the resulting libwzp_native.so lands in the place gradle will package into the final APK. - Workspace Cargo.toml: add crates/wzp-native to [workspace] members. Phase 2 (separate commit, only if Phase 1 works): - Copy cpp/oboe_bridge.{h,cpp} + getauxval_fix.c from the legacy wzp-android crate into crates/wzp-native/cpp/. - Add cc = "1" as a build-dependency on wzp-native (safe: it's a single-cdylib crate with no staticlib, so no symbol leak). - Add build.rs that compiles the Oboe C++ and the wzp-native Rust FFI exposes the audio start/stop/read/write functions. - wzp-desktop::engine.rs dlopens wzp-native at CallEngine::start, uses its audio functions instead of CPAL on Android. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
Siavash Sameni
|
c69195fe06 |
step C(android): compile engine.rs on Android with a stub CallEngine::start
Third incremental variable. Previously the engine module was cfg-gated out of the Android build entirely (`#[cfg(not(target_os = "android"))] mod engine;` in lib.rs). Now it's always compiled, so any link-time effect of having engine.rs in the compilation unit can be measured against the working baseline from build #19. Changes kept deliberately small: - lib.rs: drop the cfg gate on `mod engine;`. `use engine::CallEngine` stays gated because the Android-specific connect/disconnect/... stubs in lib.rs don't reference the type. - engine.rs: the `wzp_client::{audio_io, call}` imports + CodecId + QualityProfile are gated to non-Android (they require the `audio` feature on wzp-client which Android doesn't pull in). On Android we keep only the MediaTransport import for transport.close(). The impl block now has two `start()` methods: the full CPAL-backed one for desktop, and a 6-line Android stub that returns `Err("audio engine not yet wired on Android")` so attempts to `connect` from the UI fail cleanly. Goal: verify that linking in the compiled engine module (plus the types it references) on Android doesn't regress the working baseline. Home screen should still render and register_signal should still work. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
Siavash Sameni
|
530993854f |
revert(android): roll back to build #6 (35642d1) — pre-oboe known-good state
Spent 10+ builds chasing a __init_tcb+4 / pthread_create SIGSEGV after adding the oboe audio backend. Every "fix" made things worse. Reverting all Android-specific files to the state at |
||
|
Siavash Sameni
|
b314138caf |
feat(android): oboe/AAudio audio backend + runtime mic permission (step 3)
This is the big one — the Tauri Android app now has a real audio stack
capable of full-duplex VoIP, reusing the proven C++ Oboe bridge from the
legacy wzp-android crate.
Architecture:
- desktop/src-tauri/cpp/ — copies of oboe_bridge.{h,cpp}, oboe_stub.cpp,
and getauxval_fix.c from crates/wzp-android/cpp/. build.rs clones
google/oboe@1.8.1 into OUT_DIR and compiles the bridge + all Oboe
sources as "oboe_bridge" static lib, linking against shared libc++
(static would pull broken libc stubs that SIGSEGV in .so libraries).
- src/oboe_audio.rs — Rust side: an SPSC ring buffer matching the C++
bridge's AtomicI32 layout, plus OboeHandle::start() which returns
(capture_ring, playout_ring, owning_handle). The ring exposes the same
(available / read / write) methods as wzp_client::audio_ring::AudioRing
so CallEngine treats both backends interchangeably.
- src/engine.rs — compiled on every platform now. A cfg-switched type
alias picks wzp_client::audio_ring::AudioRing on desktop and
crate::oboe_audio::AudioRing on Android. The audio setup block has
three branches: VPIO/CPAL on macOS, CPAL on Linux/Windows, Oboe on
Android. Send/recv tasks are identical across platforms.
- src/lib.rs — removes all the "step 3 not done" Android stubs. The
engine module is no longer cfg-gated; connect / disconnect / toggle_mic
/ toggle_speaker / get_status are single implementations used by both
desktop and Android. Identity path resolves via app.path().app_data_dir()
from the Tauri setup() callback (already wired in step 1).
Runtime mic permission:
- scripts/build-tauri-android.sh now injects RECORD_AUDIO + MODIFY_AUDIO_
SETTINGS into gen/android/app/src/main/AndroidManifest.xml after init,
and overwrites MainActivity.kt with a version that calls
ActivityCompat.requestPermissions in onCreate. This is idempotent:
every build re-applies the patches so tauri re-init can't regress them.
Cargo.toml:
- cc is now an unconditional build-dep (build.rs runs on the host, so
target-gating build-deps doesn't work).
- wzp-client is now a dep on every platform. On Android it gets default
features only (no "audio"/"vpio") so CPAL isn't dragged in — oboe_audio
provides the capture/playout rings instead.
- tracing-android is added on Android so tracing events flow into logcat.
build.rs also gained embedded git hash (WZP_GIT_HASH) capture, which is
shown under the fingerprint on the home screen — already committed in
|
||
|
Siavash Sameni
|
7639aaf08d |
feat(desktop): deterministic alias from seed + git hash on home screen + fix EACCES on Android
Three home-screen issues from the first Tauri Android APK: 1. Alias was empty (no seed-derived name). Port the adjective+noun word lists from the old Kotlin SettingsRepository into a `derive_alias()` helper that maps the first 4 bytes of the seed to indices in those lists. Same seed → same alias forever, different seeds → effectively random aliases — so reinstalls keep the user's identity AND the friendly name they're used to. 2. Build identity was invisible — couldn't tell which APK was actually installed (this caused us a lot of grief on the Kotlin app). build.rs now captures `git rev-parse --short HEAD` and emits it as `WZP_GIT_HASH`, exposed via a new `get_app_info` command. The frontend stamps `build <hash> • <alias>` under the fingerprint on the home screen. 3. Register on relay failed with `Permission denied (os error 13)`. Root cause: I hardcoded `/data/data/com.wzp.phone/files/.wzp` as the identity dir, but the Tauri Android package id is `com.wzp.desktop` — so the app was trying to write into another app's data directory and getting EACCES at the filesystem layer. Fix: resolve the data dir from Tauri's `path().app_data_dir()` API in the `setup()` callback and stash it in a `OnceLock<PathBuf>`. Works on Android, macOS, Linux, Windows without any cfg gymnastics. Also: `get_app_info` returns the resolved `data_dir` so we can debug storage issues from the UI (it's set as the build-hash element's title). Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
Siavash Sameni
|
e6f77a78a7 |
feat(desktop): split main.rs into lib.rs for Tauri Mobile (Android/iOS)
Tauri 2.x Mobile links the app as a cdylib loaded from a Java Activity, so all of the Builder/command code has to live in a library crate. Move the existing logic verbatim into src/lib.rs::run() and reduce src/main.rs to a two-line desktop entry point that calls into it. Cargo.toml gets a [lib] section (crate-types: staticlib + cdylib + rlib, named wzp_desktop_lib) and the wzp-client dependency — which pulls CPAL + VoiceProcessingIO — is moved behind cfg(not(target_os = "android")) so the Android cdylib doesn't need an audio backend yet. Engine-backed Tauri commands (connect/disconnect/toggle_mic/toggle_speaker/get_status) get Android stubs that return clear "not yet wired" errors. The signaling commands (register_signal/place_call/answer_call/get_signal_status/ ping_relay/get_identity) are platform-independent and unchanged. Also: get_identity / register_signal now auto-create the seed if missing instead of erroring with "connect to a room first", and the identity dir resolves to /data/data/com.wzp.phone/files/.wzp on Android (proper app-internal storage) vs \$HOME/.wzp on desktop. Side note: src/main.rs was previously untracked — desktop builds were working only because it existed in the local worktree. This commit fixes that too. Step 1 of the Android rewrite plan (tauri-mobile scaffold). No audio yet. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |