main
4 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Siavash Sameni
|
8fcf1be341 |
feat(nat): Tailscale-inspired STUN/ICE + port mapping + mid-call re-gathering (#28)
Phase 8: 5 new modules bringing NAT traversal close to Tailscale's approach. - stun.rs: RFC 5389 STUN client — public server reflexive discovery, XOR-MAPPED-ADDRESS parsing, parallel probe with retry, STUN fallback in desktop try_reflect_own_addr() - portmap.rs: NAT-PMP (RFC 6886) + PCP (RFC 6887) + UPnP IGD port mapping — gateway discovery, acquire/release/refresh lifecycle, new PeerCandidates.mapped candidate type in dial order - ice_agent.rs: candidate lifecycle — gather(), re_gather(), apply_peer_update() with monotonic generation counter, CandidateUpdate signal message forwarded by relay - netcheck.rs: comprehensive diagnostic — NAT type, IPv4/v6, port mapping availability, relay latencies, CLI --netcheck - relay_map.rs: RTT-sorted relay map, preferred() selection, populate_from_ack() for RegisterPresenceAck.available_relays Relay: CallRegistry stores + cross-wires caller/callee_mapped_addr into CallSetup.peer_mapped_addr. Region config + available_relays populated from federation peers in RegisterPresenceAck. Desktop: place_call/answer_call call acquire_port_mapping() and fill caller/callee_mapped_addr. STUN+relay combined NAT detection. 571 tests pass (66 new), 0 regressions, 0 warnings. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
Siavash Sameni
|
766c9df442 |
feat(dred): continuous DRED tuning, PMTUD, extended Opus6k window
- DredTuner: maps live network metrics (loss/RTT/jitter) to continuous DRED duration every ~500ms instead of discrete tier-locked values. Includes jitter-spike detection for pre-emptive Starlink-style boost. - Opus6k DRED extended from 500ms to 1040ms (max libopus 1.5 supports) - PMTUD: quinn MtuDiscoveryConfig with upper_bound=1452, 300s interval - TrunkedForwarder respects discovered MTU (was hard-coded 1200) - QuinnPathSnapshot exposes quinn internal stats + discovered MTU - AudioEncoder trait: set_expected_loss() + set_dred_duration() methods - PathMonitor: sliding-window jitter variance for spike detection - Integrated into both Android and desktop send tasks in engine.rs - 14 new tests (10 tuner unit + 4 encoder integration) - Updated ARCHITECTURE.md, PROGRESS.md, PRD-dred-integration, PRD-mtu Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
Siavash Sameni
|
fa038df057 |
feat(p2p): Phase 5.5 — ICE LAN host candidates (IPv4 + IPv6)
Same-LAN P2P was failing because MikroTik masquerade (like most
consumer NATs) doesn't support NAT hairpinning — the advertised
WAN reflex addr is unreachable from a peer on the same LAN as
the advertiser. Phase 5 got us Cone NAT classification and fixed
the measurement artifact, but same-LAN direct dials still had
nowhere to land.
Phase 5.5 adds ICE-style host candidates: each client enumerates
its LAN-local network interface addresses, includes them in the
DirectCallOffer/Answer alongside the reflex addr, and the
dual-path race fans out to ALL peer candidates in parallel.
Same-LAN peers find each other via their RFC1918 IPv4 + ULA /
global-unicast IPv6 addresses without touching the NAT at all.
Dual-stack IPv6 is in scope from the start — on modern ISPs
(including Starlink) the v6 path often works even when v4
hairpinning doesn't, because there's no NAT on the v6 side.
## Changes
### `wzp_client::reflect::local_host_candidates(port)` (new)
Enumerates network interfaces via `if-addrs` and returns
SocketAddrs paired with the caller's port. Filters:
- IPv4: RFC1918 (10/8, 172.16/12, 192.168/16) + CGNAT (100.64/10)
- IPv6: global unicast (2000::/3) + ULA (fc00::/7)
- Skipped: loopback, link-local (169.254, fe80::), public v4
(already covered by reflex-addr), unspecified
Safe from any thread, one `getifaddrs(3)` syscall.
### Wire protocol (wzp-proto/packet.rs)
Three new `#[serde(default, skip_serializing_if = "Vec::is_empty")]`
fields, backward-compat with pre-5.5 clients/relays by
construction:
- `DirectCallOffer.caller_local_addrs: Vec<String>`
- `DirectCallAnswer.callee_local_addrs: Vec<String>`
- `CallSetup.peer_local_addrs: Vec<String>`
### Call registry (wzp-relay/call_registry.rs)
`DirectCall` gains `caller_local_addrs` + `callee_local_addrs`
Vec<String> fields. New `set_caller_local_addrs` /
`set_callee_local_addrs` setters. Follow the same pattern as
the reflex addr fields.
### Relay cross-wiring (wzp-relay/main.rs)
Both the local-call and cross-relay-federation paths now track
the local_addrs through the registry and inject them into the
CallSetup's peer_local_addrs. Cross-wiring is identical to the
existing peer_direct_addr logic — each party's CallSetup
carries the OTHER party's LAN candidates.
### Client side (desktop/src-tauri/lib.rs)
- `place_call`: gathers local host candidates via
`local_host_candidates(signal_endpoint.local_addr().port())`
and includes them in `DirectCallOffer.caller_local_addrs`.
The port match is critical — it's the Phase 5 shared signal
socket, so incoming dials to these addrs land on the same
endpoint that's already listening.
- `answer_call`: same, AcceptTrusted only (privacy mode keeps
LAN addrs hidden too, for consistency with the reflex addr).
- `connect` Tauri command: new `peer_local_addrs: Vec<String>`
arg. Builds a `PeerCandidates` bundle and passes it to the
dual-path race.
- Recv loop's CallSetup handler: destructures + forwards the
new field to JS via the signal-event payload.
### `dual_path::race` (wzp-client/dual_path.rs)
Signature change: takes `PeerCandidates` (reflex + local Vec)
instead of a single SocketAddr. The D-role branch now fans out
N parallel dials via `tokio::task::JoinSet` — one per candidate
— and the first successful dial wins (losers are aborted
immediately via `set.abort_all()`). Only when ALL candidates
have failed do we return Err; individual candidate failures are
just traced at debug level and the race waits for the others.
LAN host candidates are tried BEFORE the reflex addr in
`PeerCandidates::dial_order()` — they're faster when they work,
and the reflex addr is the fallback for the not-on-same-LAN
case.
### JS side (desktop/main.ts)
`connect` invoke now passes `peerLocalAddrs: data.peer_local_addrs ?? []`
alongside the existing `peerDirectAddr`.
### Tests
All existing test callsites updated for the new Vec<String>
fields (defaults to Vec::new() in tests — they don't exercise
the multi-candidate path). `dual_path.rs` integration tests
wrap the single `dead_peer` / `acceptor_listen_addr` in a
`PeerCandidates { reflexive: Some(_), local: Vec::new() }`.
Full workspace test: 423 passing (same as before 5.5).
## Expected behavior on the reporter's setup
Two phones behind MikroTik, both on the same LAN:
place_call:host_candidates {"local_addrs": ["192.168.88.21:XXX", "2001:...:YY:XXX"]}
recv:DirectCallAnswer {"callee_local_addrs": ["192.168.88.22:ZZZ", "2001:...:WW:ZZZ"]}
recv:CallSetup {"peer_direct_addr":"150.228.49.65:NN",
"peer_local_addrs":["192.168.88.22:ZZZ","2001:...:WW:ZZZ"]}
connect:dual_path_race_start {"peer_reflex":"...","peer_local":[...]}
dual_path: direct dial succeeded on candidate 0 ← LAN v4 wins
connect:dual_path_race_won {"path":"Direct"}
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
|
||
|
Siavash Sameni
|
8cdf8d486a |
feat(p2p): Phase 4 cross-relay direct calling over federation
Teaches the relay pair to route direct-call signaling across an
existing federation link. Alice on Relay A can now place a direct
call to Bob on Relay B if A and B are federation peers — the
wire protocol, call registry, and signal dispatch all learn to
track and route the cross-relay flow.
Phase 3.5's dual-path QUIC race then carries the media directly
peer-to-peer using the advertised reflex addrs, with zero
changes needed on the client side.
## Wire protocol (wzp-proto)
New `SignalMessage::FederatedSignalForward { inner, origin_relay_fp }`
envelope variant, appended at end of enum — JSON serde is
name-tagged so pre-Phase-4 relays just log "unknown variant" and
drop it. 2 new roundtrip tests (any-inner nesting + single
DirectCallOffer case).
## Call registry (wzp-relay)
`DirectCall.peer_relay_fp: Option<String>` — federation TLS fp
of the peer relay that forwarded the offer/answer for this call.
`None` on local calls, `Some` on cross-relay. Used by the answer
path to route the reply back through the same federation link
instead of trying (and failing) to deliver via local signal_hub.
New `set_peer_relay_fp` setter + 1 new unit test.
## FederationManager (wzp-relay)
Three new methods:
- `local_tls_fp()` — exposes the relay's own federation TLS fp
so main.rs can build `origin_relay_fp` fields.
- `broadcast_signal(msg) -> usize` — fan out any signal message
(in practice `FederatedSignalForward`) to every active peer
link, returning the reach count. Used when Relay A doesn't
know which peer has the target fingerprint.
- `send_signal_to_peer(fp, msg)` — targeted send for the reply
path where the registry already knows which peer relay to
hit.
Plus a new `cross_relay_signal_tx: Mutex<Option<Sender<...>>>`
field that `set_cross_relay_tx()` wires at startup so the
federation `handle_signal` can push unwrapped inner messages
into the main signal dispatcher.
## Federation handle_signal (wzp-relay)
New match arm for `FederatedSignalForward`:
- Loop prevention: drops forwards whose `origin_relay_fp` equals
this relay's own fp (prevents A→B→A echo loops without needing
TTL yet).
- Otherwise pulls the inner message out and pushes it through
`cross_relay_signal_tx` so the main loop's dispatcher task
handles it as if it had arrived locally.
## Main signal loop (wzp-relay)
### DirectCallOffer when target not local
Before falling through to Hangup, try the federation path:
- Wrap the offer in `FederatedSignalForward` with
`origin_relay_fp = this relay's tls_fp`
- `fm.broadcast_signal(forward)` — returns peer count
- If any peers reached, stash the call in local registry with
`caller_reflexive_addr` set, `peer_relay_fp` still None
(broadcast — the answer-side will identify itself when it
replies)
- Send `CallRinging` to caller immediately for UX feedback
- Only if no federation or no peers → legacy Hangup path
### DirectCallAnswer when peer is remote
- Registry lookup now reads both `peer_fingerprint` and
`peer_relay_fp` in one acquisition
- If `peer_relay_fp.is_some()`:
* Reject → forward a `Hangup` over federation via
`send_signal_to_peer` instead of local signal_hub
* Accept → wrap the raw answer in `FederatedSignalForward`,
route to the specific origin peer, then emit the LOCAL
CallSetup to our callee with `peer_direct_addr =
caller_reflexive_addr` (caller is remote; this side only
has the callee)
- If `peer_relay_fp.is_none()` → existing Phase 3 same-relay
path with both CallSetups (caller + callee)
### Cross-relay signal dispatcher task
New long-running task reading `(inner, origin_relay_fp)` from
`cross_relay_rx`. In Phase 4 MVP handles:
- `DirectCallOffer` — if target is local, create the call in
the registry with `peer_relay_fp = origin_relay_fp`, stash
caller addr, deliver offer to local callee. If target isn't
local, drop (no multi-hop in Phase 4 MVP).
- `DirectCallAnswer` — look up local caller by call_id, stash
callee addr, forward raw answer to local caller via
signal_hub, emit local CallSetup with `peer_direct_addr =
callee_reflexive_addr` (peer is local now; this side only
has the caller).
- `CallRinging` — best-effort forward to local caller for UX.
- `Hangup` — logged for now; Phase 4.1 will target by call_id.
## Integration tests
`crates/wzp-relay/tests/cross_relay_direct_call.rs` — 3 tests
that reproduce the main.rs cross-relay dispatcher logic inline
and assert the invariants without spinning up real binaries:
1. `cross_relay_offer_forwards_and_stashes_peer_relay_fp` —
Relay A gets Alice's offer, broadcasts. Relay B's dispatcher
creates the call with `peer_relay_fp = relay_a_tls_fp`.
2. `cross_relay_answer_crosswires_peer_direct_addrs` — full
round trip; both CallSetups (one on each relay) carry the
OTHER party's reflex addr.
3. `cross_relay_loop_prevention_drops_self_sourced_forward` —
explicit loop-prevention check.
Full workspace test goes from 413 → 419 passing. Clippy clean
on touched files.
## Non-goals (deferred to Phase 4.1+)
- Relay-mediated media fallback across federation — if P2P
direct fails (symmetric NAT on either side), the call errors
out with "no media path". Making the existing federation
media pipeline carry ephemeral call-<id> rooms is the Phase
4.1 lift.
- Multi-hop federation (A → B → C). Phase 4 MVP supports a
direct federation link between A and B only.
- Fingerprint → peer-relay routing gossip.
PRD: .taskmaster/docs/prd_phase4_cross_relay_p2p.txt
Tasks: 70-78 all completed
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
|