btest-rs

A Rust reimplementation of the MikroTik Bandwidth Test (btest) protocol. Both server and client modes, compatible with MikroTik RouterOS devices.

Based on

This project is a clean-room Rust reimplementation based on the protocol reverse-engineering work done by Alex Samorukov in btest-opensource. The original C implementation and protocol documentation were invaluable in making this project possible. Full credit to Alex and all contributors to that project.

The original btest-opensource project is included as a git submodule for reference and protocol documentation.

Why Rust?

• Single static binary - 2 MB, zero dependencies, runs anywhere
• Cross-platform - macOS, Linux (x86_64, ARM64), Docker
• Async I/O - tokio-based, handles many concurrent connections efficiently
• Memory safe - no buffer overflows, no use-after-free, no data races
• Easy deployment - scp one file, done. Or use the systemd installer.

Performance

Tested over WiFi 6E (MikroTik RouterOS <-> macOS):

Mode	Protocol	Speed
Server RX (1 conn)	UDP	1.05 Gbps
Client TCP download	TCP	530 Mbps
Client TCP upload	TCP	840 Mbps
Client UDP download	UDP	433 Mbps
Client TCP bidirectional	TCP	264/264 Mbps
Server bidirectional	UDP	280/393 Mbps

Installation

Pre-built binary

# Build for Linux x86_64 from macOS (requires Docker)
scripts/build-linux.sh

# Copy to server
scp dist/btest root@yourserver:/usr/local/bin/btest

From source

cargo install --path .

Docker

docker compose up -d    # Server on port 2000

systemd service

# On the target Linux server:
sudo ./scripts/install-service.sh
sudo ./scripts/install-service.sh --auth-user admin --auth-pass secret

Usage

Server mode

MikroTik devices connect to this server to run bandwidth tests.

# Basic server (no auth)
btest -s

# With authentication
btest -s -a admin -p password

# Custom port with verbose logging
btest -s -P 2000 -v

Client mode

Connect to a MikroTik device's built-in btest server.

# TCP download test
btest -c 192.168.88.1 -r

# TCP upload test
btest -c 192.168.88.1 -t

# Bidirectional
btest -c 192.168.88.1 -t -r

# UDP with bandwidth limit
btest -c 192.168.88.1 -r -u -b 100M

# With authentication
btest -c 192.168.88.1 -r -a admin -p password

Debug logging

btest -s -v      # info + debug
btest -s -vv     # info + debug + trace (hex dumps of status exchange)

MikroTik Setup

Enable btest server on MikroTik (for client mode)

/tool/bandwidth-server set enabled=yes

Run btest from MikroTik (connecting to our server)

Important: Set Connection Count to 1 — multi-connection mode is not supported.

/tool/bandwidth-test address=<server-ip> direction=both protocol=udp user=admin password=password connection-count=1

Protocol

The MikroTik btest protocol uses:

• TCP port 2000 for control (handshake, auth, status exchange)
• UDP ports 2001+ for data transfer
• MD5 challenge-response authentication (RouterOS < 6.43)
• 1-second status interval with dynamic speed adjustment

See the original protocol documentation for wire-format details.

Known Limitations

• EC-SRP5 authentication (RouterOS >= 6.43) is not yet supported for client mode. Server mode works fine with MD5 auth. Disable auth on the MikroTik btest server as a workaround.
• Multi-connection UDP is supported. MikroTik's multi-connection mode sends from multiple source ports which are all accepted by the server.

Testing

cargo test                           # Unit + integration tests
scripts/test-local.sh                # Loopback self-test
scripts/test-mikrotik.sh <ip>        # Test against MikroTik device
scripts/test-docker.sh               # Docker container test

Credits

• btest-opensource by Alex Samorukov - Original C implementation and protocol reverse-engineering that made this project possible. Licensed under MIT.
• MikroTik - Creator of the bandwidth test protocol and RouterOS.

License

MIT License - see LICENSE.

This project is derived from btest-opensource (MIT License, Copyright 2016 Alex Samorukov). The original license and copyright notice are preserved as required.